758254

Batavia BT-CM001 - 7063459 Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
English
6
3. Before rst use
Remove the machine and the accessories
from the packaging. Check the machine for
transport damage and do not use the
machine in case of damages. Keep the
packing materials away from children, risk
of suffocation!
4. Contents of packing
1× Universal cordless mixer
1× Quick coupler
2× Flange spanners
1× Universal mixing paddle
1× Operating instructions
5. Intended use
The mixer has been designed for private use
only. It has not been designed for operation
in industry. With the supplied mixing paddle
the electric mixer is suitable for mixing
low-viscosity emulsions and viscous mate-
rials, for example: paints, lacquer, adhesives,
mortar, etc.
6. Operation
a. Firmly hold the electric mixer with both
hands.
b. Press safety button (7) and the ON/OFF
switch (8) with one hand. When the
device is operating there is no need to
hold down the safety switch.
Note: If the on / off switch is pressed lightly,
the mixer will run at the lowest speed. If the
on/offswitchispressedrmly,themixer
will run at the highest speed.
c. To switch off the device, release the
ON/OFF switch (8).
7. Gear selection
The mixer is equipped with an electronic
speed regulator and with a 2-gear drive. Use
the gear selection switch (4) to select one
of the two available gear speeds. The mixer
must have come to a complete standstill
before the gears are changed.
8. Inserting the agitator
Always remove the battery before inserting
or exchanging the agitator. The mixer is
equipped with a M 14 collet.
a. Screw the quick coupler (2) onto the
shaft (3) by turning counter clockwise.
b. Fix it by using the 2 supplied open-end
spanners. Turn the spanners to each
othersothatthequickcouplerisrmly
xedinthetoolcarrier.Toremovethe
quick coupler, put the wrench back in
and pull them away from each other.
c. Draw back the locking sleeve on the
quick coupler to insert the agitator (1).
Push forward the locking sleeve to lock
the agitator in place.
9. Cleaning and maintenance
WARNING: Remove the battery before car-
rying out any maintenance/cleaning of the
tool.
9.1 Cleaning
• Use only a moist cloth to clean the unit.
Do not use aggressive chemicals which
may dissolve plastic parts, or abrasives.
Always keep the ventilation slots clean
and free from obstructions.
• Keep safety devices, ventilation open-
ings and the motor housing as free as
possible from dirt and dust. Rub the
electric power tool with a clean cloth or
blow over it with low pressure com-
pressed air.
• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap.
9.2 Maintenance
There are no inner parts of the tool which
need maintenance.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-CM001 - 7063459 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CM001 - 7063459 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info