Manual Batavia BT-CHT002 - 7062516 (page 7 of 16) (English, German, Dutch, French)

757196

Zoom out

Zoom in

1/16

English

8 9

English

MAINTENANCE AND CLEANING

WARNING: Always disconnect from the mains

power supply, before carrying out any mainte-

nance/ cleaning of the charger. Remove the

battery before carrying out any maintenance/

cleaning of the tool.

Maintenance

There are no inner parts of the tool which need

maintenance.

Cleaning

• Keep safety devices, ventilation openings

and the motor housing as free as possible

from dirt and dust. Rub the electric power

tool with a clean cloth or blow over it with

low pressure compressed air.

• We recommend that you clean your elec-

tric power tool immediately after each use.

• Clean the electric power tool regularly with

a damp cloth and somewhat soft soap. Do

not use any cleaning or solvent materials;

these can attack the device’s plastic com-

ponents. Make sure that no water can get

inside the electric power tool.

• The cutters should be cleaned and lubri-

cated at regular intervals in order to ensure

best performance at all times. Remove

deposits with a brush and apply a thin lm

of oil.

TECHNICAL DATA

No Load Speed. . . . . . . . . . . 2200 min-1

Cutter rail length . . . . . . . . . . . 450 mm

Total blade length. . . . . . . . . . . 510 mm

Max. cutting capacity. . . . . . . . ø14.5 mm

Weight . . . . . . . . . . . . . . . . . 2.1 kg

Sound Pressure Level LpA . . . . .75.19 dB(A)

Uncertainty KpA . . . . . . . . . . . . . . 3 dB

Sound Power Level LWA . . . . . .86,19 dB(A)

Uncertainty KWA. . . . . . . . . . . . . . 3 dB

Hand Arm Vibration. . . . . . . . .0.933 m/s2

Uncertainty K. . . . . . . . . . . . . 1.5 m/s2

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in

EN 60745; it may be used to compare one tool

with another and as a preliminary assessment

of exposure to vibration when using the tool for

the applications mentioned.

– using the tool for different applications, or

with different or poorly maintained

accessories, may signicantly increase the

exposure level

– the times when the tool is switched off or

when it is running but not actually doing

the job, may signicantly reduce the

exposure level

Protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns.

DISPOSAL

Do not dispose of electric power

tools with domestic refuse.

The electric power tool is shipped in

packaging to reduce transport damage. This

packaging is a raw material and as such can

either be reused or can be fed back into the

raw material cycle. The electric power tool and

its accessories are made from various materi-

als such as metals and plastics. Take defective

components to a special refuse collection

point. Ask about these at your specialist shop

or local council. The product and the user

manual may be subject to changes. Technical

data may be changed without prior notice.

Batteries

Think of the environment when disposing of

batteries. Contact your local authorities to nd

out where your nearest disposal area is.

Do not dispose of batteries with domestic

refuse.

Do not dispose of by burning, risk of explosion.

BEFORE FIRST USE

Remove the machine and the accessories from

the packaging. Check the machine for trans-

port damage and do not use the machine in

case of damages. Keep the packing materials

away from children, risk of suffocation!

INTENDED USE

Battery-powered, portable, light-duty garden

tool for cutting and trimming soft, new growth

of hedges, bushes and shrubs. The device is

unsuitable for cutting thicker branches, hard

wood or other materials.

WARNING: If this device is used for any other

purpose, there may be a risk of damage to the

hedge trimmer or serious injury to the user.

UNPACKING YOUR TOOL

• Carefully unpack and inspect your new

tool. Familiarise yourself with all its fea-

tures and functions.

• Ensure that all parts of the tool are present

and in good condition. If any parts are

missing or damaged, have such parts

replaced before attempting to use this

tool.

OPERATION

WARNING: ALWAYS wear eye protection,

adequate respiratory and hearing protection,

as well as suitable gloves, when working with

this tool.

WARNING: If it is used for any other purpose

not expressly permitted by these operating

instructions, there may be a risk of damage to

the hedge trimmer or serious injury to the user.

WARNING: DO NOT use the hedge trimmer in

the rain or store the hedge trimmer in wet

conditions.

WARNING: Do not let the blade come into

contact with fencing wire or any other object

that could damage it.

Switching on and off

Note: This hedge trimmer is tted with a two-

hand safety switch.

1. To switch the hedge trimmer on, press the

Safety Bar Switch (4) on the front grip (5)

with one hand and the on/off Switch (6)

with the other hand.

2. To stop the hedge trimmer, move the

hedge trimmer away from the cutting area

and release either one or both of the

switches.

Cutting

WARNING: If the blade stalls during cutting,

stop the hedge trimmer immediately and dis-

connect it from the power supply, before inves-

tigating the cause. Then remove any jammed

debris from the blades and examine the blades

for any damage before recommencing cutting.

1. Assume a secure position, using two

hands to hold the trimmer, and switch on

(see ‘Switching on and off’).

2. ALWAYS allow the blade to reach full

speed before commencing the cut.

3. Always move in a forward direction.

WARNING: DO NOT move backwards, as you

may fall over unseen obstacles. DO NOT cut

towards solid objects such as walls, trees or

vehicles.

4. Trim both sides of the hedge, starting at

the bottom.

5. Pass the blade lightly through the surface

of the hedge. Do not attempt to cut too

deep.

6. Trim the top of the hedge last.

Note: For older hedges that require cutting

back substantially, use pruning shears or a

suitable saw to cut the thicker branches, and

then nish the job with the hedge trimmer.

Shaping

• Trim a hedge so that it is wider at the

bottom than the top. This improves light

penetration and promotes healthy growth.

• Narrow the hedge approximately 100mm

for every metre in height.

Pruning

• For optimum trimming performance, guide

the blade teeth at an angle of approx. 15°

to the hedge.

• To achieve a hedge with a uniform height,

it is recommended that you stretch a piece

of string along the edge of the hedge for

guidance. Then simply cut away all twigs

projecting above the line.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CHT002 - 7062516 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CHT002 - 7062516 Manual

Product: