758124
8
Zoom out
Zoom in
Previous page
1/22
Next page
English
6
9. Maintenance and cleaning
WARNING: Always disconnect from the
mains power supply, before carrying out any
maintenance/ cleaning of the charger.
Remove the battery before carrying out any
maintenance/ cleaning of the tool.
9.1 Maintenance
There are no inner parts of the tool which
need maintenance.
9.2 Cleaning
Keep safety devices, ventilation open-
ings and the motor housing as free as
possible from dirt and dust. Rub the
electric power tool with a clean cloth or
blow over it with low pressure com-
pressed air.
We recommend that you clean your
electric power tool immediately after
each use.
Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap.
Do not use any cleaning or solvent materi-
als; these can attack the device’s plastic
components. Make sure that no water can
get inside the electric power tool.
10. Storing
Clean the device before storing it.
Before storing check all parts for
damages.
Store the device indoors in dry place
that is protected from dust and dirt and
extreme temperatures.
11. Technical data
Rated voltage . . . . . . . . . . . . . 18 V DC
Cartridge size . . . . . . . . . . max. 300 ml
Extrusion speed no load . . max. 7.8 mm/s
Extrusion force. . . . . . . .20002500 Nm
Sound pressure level LpA . . . . 55.22 dB(A)
Uncertainty KpA. . . . . . . . . . . . . 3 dB(A)
Sound power level LWA . . . . . 66.22 dB(A)
Uncertainty KWA . . . . . . . . . . . . 3 dB(A)
Hand/arm vibration . . . . . . . . . .0.4 m/s2
Uncertainty K. . . . . . . . . . . . . .1.5 m/s2
Dimensions . . . . . . . .23.4 × 7.2 × 43 cm
Net weight (without battery) . . . . . 1550 g
* Sound and vibration emissions may differ
from the declared values during use
depending on the ways in which the tool is
used.
11.1 Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
using the tool for different applications,
or with different or poorly maintained
accessories,maysignicantlyincrease
the exposure level
the times when the tool is switched off
or when it is running but not actually
doingthejob,maysignicantlyreduce
the exposure level.
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-CCG001 - 7063439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CCG001 - 7063439 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info