Manual Batavia BT-CCD001 - 7062633 (page 12 of 26) (English, German, Dutch, French)

758264

Zoom out

Zoom in

1/26

English

Selection:

Mode selector Torque selector Speed

Screwing 1 – 16* 1

Drilling Masonry /

Concrete

N/A 2

Drilling Wood N/A 1 or 2

Drilling Metal N/A 1 or 2

• Select a low setting for small screws or

soft work material.

• Select a high setting for large screws, hard

work materials and when removing

screws.

• You should preferably choose a setting as

low as possible when driving screws.

Select a higher setting if the motor slips

before the screw is fully tightened.

WARNING: If the power tool gets excessively

hot in use, stop using the tool immediately and

allow to cool before continuing work. The cool-

ing period can be reduced by operating the

drill at maximum speed with no load. Always

make sure the Motor Vents (6) are not blocked

and do not allow dust to enter the body of the

tool through the Motor Vents; dust, especially

metallic dust, may damage or destroy the tool.

Switching the machine on and off

The on/off switch (13) is used for activating the

machine and adjusting rotation speed.

• Pressing the on/off switch (13) will activate

the machine, the further the switch is

being pushed, the faster the drill will turn.

• Releasing the on/off switch (13) will stop

the machine.

LED lamp

The LED lamp (14) will be lit automatically as

soon as you press the ON/OFF switch (13).

ACCESSORIES

Use only accessories with an allowable speed

matching at least the highest no-load speed of

the tool

MAINTENANCE AND CLEANING

WARNING: Always disconnect from the mains

power supply, before carrying out any mainte-

nance/ cleaning of the charger. Remove the

battery before carrying out any maintenance/

cleaning of the tool.

Maintenance

There are no inner parts of the tool which need

maintenance.

Cleaning

• Keep safety devices, ventilation openings

and the motor housing as free as possible

from dirt and dust. Rub the electric power

tool with a clean cloth or blow over it with

low pressure compressed air.

• We recommend that you clean your elec-

tric power tool immediately after each use.

• Clean the electric power tool regularly with

a damp cloth and somewhat soft soap.

Do not use any cleaning or solvent materials;

these can attack the device’s plastic compo-

nents. Make sure that no water can get inside

the electric power tool.

TECHNICAL DATA

Speed . . . . . . . . . . 0 – 350 / 1200 min-1

Impacts per Minute. . .0– 6000 / 20 000 min-1

Chuck . . . . . . . . . . . . . . . 2 – 13 mm

Torque hard/soft . . . . . . . . . . 25 / 48 Nm

Dimensions . . . . . . . . . .23 × 10 × 22 cm

Weight . . . . . . . . . . . . . . . . . 1.28 kg

Sound Pressure Level LpA . . . . 80.80 dB(A)

Uncertainty KpA . . . . . . . . . . . . . . 3 dB

Sound Power Level LWA . . . . . 91.80 dB(A)

Uncertainty KWA. . . . . . . . . . . . . . 3 dB

Hand Arm Vibration

(No Load) . . . . . . . . . . . . . . 0.748 m/s2

(In Metal) . . . . . . . . . . . . . . 1.753 m/s2

(In Masonry) . . . . . . . . . . . . 18.83 m/s2

Uncertainty K. . . . . . . . . . . . . .1.5m/s2

7062504-Cordless_Combi_Drill-Ma-1702-06.indb 10 27-09-17 09:18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CCD001 - 7062633 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CCD001 - 7062633 Manual

Product: