Manual Batavia BT-CB001 7063096 (page 9 of 30) (English, German, Dutch, French)

759819

Zoom out

Zoom in

1/30

English

• Always make sure to have a safe stand

while working with the device.

• Do not overload the device during work.

Do not block the blower outlet and the

suction inlet while working with the

device.

• Make sure long hair or loose clothing

cannot get into the openings of the

device.

• In dusty locations, it is advisable to

slightly dampen the surface with a

suitable spraying device to avoid too

much dust.

• In case of stubborn soiling, it is advisa-

ble to loosen the surface with a rake or

broom.

• After operation, remove the battery

from the device to avoid unintentional

switching on.

9. LED

• To switch on the LED, press the button

(8) once.

• To switch off the LED, press the button

again.

10. Turnable handle

The handle can be locked in 2 working

positions.

To avoid unintentional operation, of the

device, remove the battery!

10.1 To adjust the working position of the

handle, slide the handle unlock button

(4) forwards and simultaneously turn

the blower to the side.

10.2 Turn the handle until you hear a click

sound and the handle is properly locked

in this position.

11. Speed regulator

Thedeviceisequippedwithaninnitely

adjustable speed regulator (6).

11.1 When starting work, adjust the speed

regulator to the lowest setting for low

air volume.

11.2 Turn the speed regulator in direction to

the highest setting 7, according to the

desired application.

12. Assembly – Operating as vol-

ume pump

12.1 Toinatewatertoys(e.g.waterballs),

mount the nozzle holder (10) on the

blower outlet (3) of the device.

12.2 Insert the suitable nozzle (11) into the

nozzle holder (10).

12.3 Make sure the nozzle holder is properly

locked in the blower opening.

• Donotleavetheinatingobject

unattended!

• The device does not switch off auto-

matically.Thustheobjecttobeinated

can burst.

13. Assembly – Extracting clean air

13.1 For extracting clean air from an object,

e.g.fromaninatedairbed,mountthe

suitable nozzle (11) on the suction inlet

(9) and switch on the device.

13.2 Do not leave the device unattended

during work.

14. Maintenance and cleaning

WARNING: Always disconnect from the

mains power supply, before carrying out any

maintenance/ cleaning of the charger.

Remove the battery before carrying out any

maintenance/ cleaning of the tool.

14.1 Maintenance

There are no inner parts of the tool which

need maintenance.

14.2 Cleaning

• Keep safety devices, ventilation open-

ings and the motor housing as free as

possible from dirt and dust. Rub the

electric power tool with a clean cloth or

blow over it with low pressure com-

pressed air.

• We recommend that you clean your

electric power tool immediately after

each use.

• Clean the electric power tool regularly

with a damp cloth and somewhat soft

soap.

Do not use any cleaning or solvent materi-

als; these can attack the device’s plastic

components. Make sure that no water can

get inside the electric power tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CB001 7063096 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CB001 7063096 Manual

Product: