Manual Basetech MH-555C (page 4 of 12) (English, German, Dutch, French)

675146

Zoom out

Zoom in

1/12



Operating instructions

Intended use



The product is used to automatically turn on/off an electric load (e.g. heater or air conditioner)

when the temperature is below/above a certain level.

See chapter “Technical data” for information on connection and the maximum permissible

power consumption of the connected electrical loads.

This product is only to be installed and used indoors in dry conditions.

Always observe the safety instructions and all other information included in these operating

instructions. Read the operating manual carefully; keep it in a safe place or pass it on to others

using the product.

Any use other than that described above could lead to damage to this product and involves

the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or

converted!

This product complies with the applicable national and European requirements. All names

Package contents

• Room temperature controller

• Operating instructions

Up-to-date operating instructions:

1. Open www.conrad.com/downloads in a browser or scan the dis-

played QR code.

2. Select document type and language and enter the item number

into the search field. After submitting the query you can download

displayed records.

Explanation of symbols

The lightning symbol indicates a health hazard, e.g., electric shock.

This symbol indicates specific risks associated with handling, operation or use.

The arrow symbol indicates special tips and operating information.

The product may be used only in dry, indoor rooms; it must not get damp or wet.

Observe the operating instructions!

Safety instructions

Read the complete operating manual carefully before using the product, as it

contains important information about the correct installation and operation.

Damages due to failure to follow these operating instructions will void the

warranty! We do not assume any liability for any resulting damage!

Attention, important note!

This device should be installed only by people with relevant electro-technical

knowledge and experience! *)

If it is not installed properly, you risk:

• your own life

• the life of the user of the electrical system.

If it is installed improperly, you risk severe damage to property, e.g., by fire.

You face the risk of personal liability for personal injury and material damage.

Contact an electrician!

*) Specialist knowledge required for the installation:

For the installation, in particular, the following specialist knowledge is required:

• the “5 safety rules” to be followed: Switch off power; secure against switching back

on; determine voltage-free status; earthing and short-circuiting; cover or fence off

nearby live parts

• Choose appropriate tools, meters and, if necessary, personal protective equip-

ment

• Evaluation of the measurement results

• Choose the electrical installation material to ensure the disconnect conditions

• IP protection types

• Installation of the electrical installation material

• Type of mains supply network (TN system, IT system, TT system) and the con-

nection conditions that follow from them (classical earthing, protective earthing,

required additional measures, etc.)

If you do not have the expertise required for the installation, do not connect

and install it yourself, rather ask a qualified technician.

a) General

• The unauthorised conversion and/or modification of the product is not permitted for

safety and approval reasons (CE). Never open/dismantle it (apart from the works

for installation and connection described in the manual)!

Maintenance, adjustment or repair work may only be carried out by an expert/

authorised service centre, which is familiar with the hazards involved and the

relevant regulations.

• The product is not a toy and does not belong in the hands of children. There is a

risk of a life-threatening electric shock!

• The accident prevention regulations of the association of compensation insurers

must be followed when using all electrical facilities and equipment in commercial

locations!

• Do not leave the packaging material unattended since this may become a danger-

ous plaything for children.

• Handle the product with care; it can be damaged by impacts, blows, or accidental

falls, even from a low height.

• If you have any questions that are not answered in these operating instructions,

please contact our technical department or another specialist.

b) Operating location

• The product may be installed and used only in dry indoor spaces; it must not get

damp or wet!

• Use the product only when it is securely installed and steady. Never install and use

the product in a vehicle.

• Be especially careful if children are around. Children cannot recognise the danger

arising from the incorrect use of electrical devices. There is a risk of a life-threat-

ening electric shock!

• The product must not be exposed to extreme temperatures, direct sunlight, strong

vibrations, dust, dirt or heavy mechanical stress. Keep the product away from

strong magnetic fields generated by machines, electric motors or loudspeakers.

• Do not operate the device in environments where there are high levels of dust,

flammable gases, vapours or solvents. There is a danger of fire and explosion!

c) Installation, Connection

• During installation, all poles must be disconnected from the mains voltage, e.g., via

RCD. There must be an appropriately dimensioned fuse or circuit breaker between

the RCD and the product.

• Install the product only in an easy-to-reach position.

• Perform installation and connection only when all supply lines are disconnected

from the mains voltage. Otherwise, there is a risk of a life-threatening electric

shock!

• Also observe the safety and operating instructions of any other devices that are

connected to this product.

• Do not connect the product to the power supply immediately after it has been

transferred from a cold room into a warm one (e.g., during transport). The conden-

sation that forms might destroy the device. Moreover, there is danger of electric

shock!

Allow the device to reach room temperature before switching it on. Wait until

the condensation has evaporated. This might take several hours. Only after this

should it be installed, connected to the mains supply and put into use.

Room temperature controller “MH-555C“

Item no. 1407844

Version 06/17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Basetech MH-555C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Basetech MH-555C Manual

Product: