738538

Basetech 1528590 Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2020 by Conrad Electronic SE. 1528590_v2_0620_02_dh_en
Preparation
Type labels in different languages are included in the package. Stick the language label in your
language over the German language label on the Weekly timer.
Choose between continuous operation and switch operation
On the side of the Weekly timer, there is a slide switch for selecting the desired type of opera-
tion:
Position “ ” The socket is permanently switched on; settings on the Weekly timer are not
important
Position “ ” The socket is automatically switched on or off via the Weekly timer according to
the existing settings
Setting the time
Turn the outer setting ring with the imprinted times of day clockwise (observe the large arrow
on the inner ring), until the symbol “ ” on the inner ring shows the current time and date of
the week.
Turn the setting ring only clockwise; it can be moved easily.
It is not possible to turn anti-clockwise! Do not exert any force! If the Weekly timer is
damaged due to that, the warranty will be void!
The Weekly timer only works when it is supplied with electricity, i.e. when it is connected to an
active mains socket.
Setting the on/off times
With the segments on the on the edge of the setting ring (96 shift segments for 7 days), you can
set the times for switching on or switching off.
A segment when pressed down activates the socket (mains voltage existing); a segment when
pushed upwards or pulled out switches the socket off (no voltage, the connected device is off).
Example: If a connected appliance should be switched on between 6 and 10 o‘clock every
weekday, press the segments between 6 and 10 o‘clock downwards every weekday. All the
other segments must be pulled out.
There is labelling of the weekdays on the setting ring (in the English language):
Labelling on the setting ring Weekday
MONDAY Monday
TUESDAY Tuesday
WEDNESDAY Wednesday
THURSDAY Thursday
FRIDAY Friday
SATURDAY Saturday
SUNDAY Sunday
With the design of the Weekly timer (mechanical drive and switching process;
96 shift segments for 7 days), deviations from the switching times occur.
For that reason, the electronic Weekly timer should be used instead for switching
processes or switching times that require accuracy.
The mechanical Weekly timer has, however the great advantage that a setting can
be made very quickly.
Connecting a device to the Weekly timer
• Switch the device off.
• Plug the device to the socket of the Weekly timer; push the plug completely into the socket
of the Weekly timer.
• Switch the device on.
• If the slide switch for the type of operation is in the position “ ”, the socket of the Weekly timer
is thus switched off permanently.
If the slide switch for the type of operation is in the position “ ”, the socket of the Weekly
timer is automatically switched on or off depending the segments on the setting ring.
When the socket on the Weekly timer is activated, a red LED on the front side of the
Weekly timer lights up.
Care and cleaning
Before cleaning the product, disconnect the appliance from the Weekly timer. Disconnect then
the Weekly timer from the power supply by pulling it out of the mains socket.
Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these
could damage the housing or even impair operation.
Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Technical data
Operating voltage .................................230 V/AC, 50 Hz
Connection power .................................Ohmic load: max. 3680 W (230 V/AC, 16 A)
..............................................................Inductive load: max. 460 W (230 V/AC, 2 A)
Devices with mainly resistive load are, e.g., light bulbs, heaters, etc.
Powered devices with inductive load are, e.g., engines, control gears, conventional
transformers, energy-saving bulbs, etc.
Protection type ......................................IP20
Switch type ...........................................Microswitch (single-pole)
Smallest switchable time unit ...............1h 45min (96 shift segments for 7 days)
Enhanced protection against
accidental contact ................................. yes
Ambient conditions ............................... Temperature 0 °C to +40 °C, air humidity 20% to 85%
relative, non-condensing
Dimensions ........................................... 121.5 x 74.5 x 76 mm (L x W x H, including plug)
Weight ..................................................166 g
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Basetech 1528590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Basetech 1528590 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info