554389
11
Zoom out
Zoom in
Previous page
1/17
Next page
Pag. 10
USE AND MAINTENANCE MANUAL
GB
Er.
03
Thermostop timeout
The boiler temperature did not reach the set point within the extension of
the operating cycle washing phase. The boiler heating is disabled.
Contact the authorised service centre.
Er.
04
Tank loading
timeout
Water level inside the washing tank not reached. Turn the machine off
and on, make sure that the overflow pipes are fitted correctly and
that water supply is open, otherwise contact the authorised service
centre.
Er.
05
Er
06
Open tank sensor
Broken tank sensor. The tank heating is disabled. Contact the
authorised service centre.
Er.
07
Er
.08
Open boiler sensor
Broken boiler sensor. The boiler heating is disabled. Contact the
authorised service centre.
er
ht
Too high tank
temperature
B4 > MaxTankTemp. The tank heating is disabled.
Er
Hb”
Too high boiler
temperature
B2 > MaxBoilerTemp. The boiler heating is disabled.
Er
sf
Electromechanic
safety
It is likely that a safety thermostat has been triggered.
Turn the machine off and on; should the problem still occur, contact
an authorised service centre.
Er
09
Boiler loading
timeout
Problem with boiler water loading, make sure the water supply is correctly
open and that flow rate is suitable, according to machine nameplate
specifications. Turn the machine off and on; should the problem still
occur, contact the service centre.
Er
01
Failed rinse cycle
The rinse cycle has not been correctly carried out, check that rinse
spraying nozzles are free from any obstruction.
Should the problem still occur, contact the service centre.
Er
SL
Level safety
Problem with water drain. Drain electric pump has not drained correctly.
Check drain tubes; should the problem still occur, contact the service
centre.
Er rb”
Attempt to reset
error 09
The machine displays this message when attempting to solve boiler
loading problem.
Er 22
Tank thermostop
timeout
Problem with boiler water heating. Contact a service centre.
no
ns
Salt missing
(warning)
( machines with water softener )
Add salt in the relevant reservoir inside the washing tank
“no
dn”
Detergent missing
(warning)
“no
bn”
Rinse aid missing
(warning)
“no
na”
Softener service
(warning)
( machines with external water softener )
Carry out resin reconditioning.
“no
13
Break tank empty
(warning)
If this message is displayed quite often, make sure the water flow rate is
correct according to machine specifications.
Warning: By turning the machine off and on again, the warning
resets and thus, if the problem has not been solved, it will be
displayed again.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher DS 901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher DS 901 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher DS 901

Bartscher DS 901 User Manual - German - 17 pages

Bartscher DS 901 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info