554388
17
Zoom out
Zoom in
Previous page
1/22
Next page
EN
page 40
6. MACHINE INSTALLATION
6.1 Handling
6.1.1 Handling the product
The machines must be handled strictly as shown in pict. 4 regarding the grip points indicated
for lifting with a lift truck.
Latch the machine in a way that secures no vibration or shocks during transportation.
N.B.: Slinging with ropes not recommended.
After unpacking, make sure the appliance has not been damaged due to transportation. If it
has been, do notify the seller about this problem. If the damage might question the machine’s
safety, do not install the appliance. See chapter 8 for disposal of the packing material.
Fig. 4
6.1.2 Storage
Storage temperature: min. +4°C - max +50°C - humidity <90%.
The stored parts should be checked periodically, to detect any sign of deterioration.
Do not put anything on the machine, even if packed in its box.
6.2 Prepare for installation
This is just a guide-line for the machine installation.
Theinstallationmustbeperformedbyaqualiedengineer.
6.2.1 Room features
Install the machine, in a room closed to weather and with a guaranteed temperature-range
between 5 and 35°C.
The machine is equipped with thermostatic sensors to manage the temperatures. To gua-
rantee a proper functionality these sensor shall not operate at a room temperature below
5 C°.
For this reason, it is fundamental that before starting the machine reaches the room tem-
perature.
6.2.2 Electrical connection - Characteristics
The electrical connection to network shall be carried out in accordance to the local laws in
force.
Make sure that the supply voltage is the same as reported on the machine plate and that
the network can stand the needed power absorption shown on the same plate.
Makesurethatthefacilityisequippedwithefcientgroundconnection.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher Deltamat TF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher Deltamat TF in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher Deltamat TF

Bartscher Deltamat TF User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info