554384
27
Zoom out
Zoom in
Previous page
1/40
Next page
EN
page 23
1. MACHINE INSTALLATION
1.1 Rinse-aid dosing pump functioning
Functioning:
The dosing pump is powered by the pressure generated by the rinse pump, used to load
a spring.
The release of the spring generates the suction of the rinse-aid chemical from its container
to the boiler.
To prime the rinse-aid pump, run some wash/rinse cycles.
Adjustment:
The dosing pump takes a determined quantity of rinse-aid chemical at each rinse.
This quantity is adjustable from 0 to 4 cm³, equivalent to circa 0 to 30 cm length of the
suction hose.
Turn the adjustment screw clockwise to reduce capacity.
Turn the adjustment screw anticlockwise, to achieve the maximum capacity (up to 20 turns).
C
D
B
A
code 10799/G
pict. 1
code 10799
pict. 2
C
D
B
A
12506
10705/O
10705/N
10705/M
10705/D
10705/C
10705/T
10705/E
10705/R
10705/G
10705/C
10705/D
10799/G
10805
10805
10806
10799
10805
10807
10808
1.2 Detergent dosing pump functioning
Functioning:
The detergent dosing pump is a peristaltic pump.
To prime the detergent dosing pump, just run some free wash cycles.
Adjustment:
To adjust the capacity of the pump, use a screwdriver (see picture 2).
2 cm length of the suction hose are equivalent to circa 0,25 cm³, equal to 0,3 g (with product
density of 1,2 g / cm³).
1.3 Thermostop Function
The machine features a standard Thermostop safety system.
The Thermostop system guarantees that the rinse cycle is started only when and if the
water temperature in the boiler has reached the temperature selected in the "1" parameter
(see chap. 1.5.1).
The duration of the wash cycle is extended in time till the water temperature in the boiler
has reached the set temperature.
The wash cycle gets longer in time if the machine is fed with water at the wrong temperature
(cold water, below 50°C) or if there is a failure in heating the water in the boiler.
GERMAC
15185
Ø 8
SEKO
15108/E
Ø 10
pict. 2
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher Deltamat TF 641 LP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher Deltamat TF 641 LP in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher Deltamat TF 641 LP

Bartscher Deltamat TF 641 LP User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info