Manual Bartscher Deltamat TF 641 LP (page 22 of 40) (English)

554384

Zoom out

Zoom in

1/40

page 44

9. TROUBLESHOOTING

N.B.: For any other question, please contact your Service provider.

The manufacturer has right to modify any technical characteristics without prior notice.

Type of Problem Possible Causes Cure

The machine does not turn

MainswitchnotON. Turn switch ON.

The machine does not load

water.

Water valve shut. Open the hot and/or cold water valve.

Rinseareanozzlesorsolenoid-valve

lterblockedand/orscaledwith

limestone.

Cleantherinsearmnozzles,pipingandsolenoid-valvelter.

Checkthatthewaterhardnessis<10°f.

Defective pressure-switch. Replacepressure-switch.

The water drains very slowly

from the machine

Scarcewatersupplypressure Check the water supply pressure

Rinseboosterpumpblocked(if

installed)

CallforService

STARTbutton"A"ashing

(redcolour)

Seechapter7"Alarms". ---

Washing results are

unsatisfactory.

Thewashingnozzlesareobstructed

or the rack does not rotate.

Cleanthenozzlescarefully,andchecktherightpositioningof

thewash-arm,tighteningrmly.

Foamispresent. Use no-foam detergents or reduce the dose in use. Check the

rinse-aid dosage.

Fatsorstarchesnotremoved. Insufcientdetergentconcentration.

Filtersaredirty. Removelters,cleanwithbrushunderajetofwaterand

replace in original position.

Checktanktemperature(whichmust

bebetween50°Cand60°C).

Adjustthethermostatorcheckcorrectheatingelementopera-

tion.

Washtimeinsufcientforthetypeof

dirt.

Selectalongerwash-cycle,ifpossible,otherwiserepeatthe

wash cycle.

Wash water is dirty. Drainthetankwater,cleanthelters;rellthetankandreplace

thelterscorrectly.

Glassesordishesarenot

properly dried.

Not enough rinse aid. Increasedosagebyturningthedispenserscrew(callforServi-

ce).

The rack is not suitable for the pots or

the tools.

Use the suitable rack which gives the pots and tools an inclined

position so that water can rinse away.

The washed items may have been

sitting in the wash chamber too long.

Assoonasthecyclestops,removetherackwithpotsandtools

so that they can dry more quickly in the air.

Rinsetemperatureunder80°C. Check the boiler thermostat temperature.

Surfaceofdishesandglassestoo

rough or porous for material wear.

Replacetypeofdishesandglassesused.Ifthedirtonthe

dishes is dry and old, soak before washing.

Streaksandspotsonglas-

ses and dishes.

Too much rinse-aid chemical. Reducetherinseaidamountbyturningthemicrometric

dispenserscrew(seepar.1.4"Rinseaiddispenser").

Too hard water. Check the water quality. Water must not exceed 8°f in hardness.

Forapplianceswithsoftener:toolittle

salt in the salt container or the resins

have not been properly regenerated.

Fillthesaltcontainer(coarsesalt:1-2mmgrains)andregene-

ratetheresinsmoreoften.Iflimedepositsarealsoobservedon

thebodyofthemachine,haveaqualiedtechniciancheckthe

operation of the water softener.

Saltpresentindishwashersump. Thoroughly clean and rinse the appliance, and avoid spilling salt

whenllingthecontainer.

The machine suddenly

stops during operation.

The machine is connected to an

overload device.

Connectthemachineonaownoverloaddevice(callfor

Service).

Amachinesafetydevicewas

triggered.

Checktheelectricaldevices(callforService).

The machine stops during

the wash stage and starts

rellingwater.

The previous day's water was not

changed.

Drainthetanktotallyandrell.

Excessive water temperature in tank. CallforServicetocheckthermostatandpressure-switch.

Defective pressure switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher Deltamat TF 641 LP in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher Deltamat TF 641 LP

Bartscher Deltamat TF 641 LP User Manual - German - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bartscher Deltamat TF 641 LP Manual

Product: