796794
18
Zoom out
Zoom in
Previous page
1/28
Next page
Installation and operation
16 / 26 700274
EN
Always pay attention to the number of washers on bearing pivots and screws.
Always align the door carefully so that it closes tightly.
When adapting, proceed as follows.
Fig. 5
1. Remove the bracket (1, Fig. 5) and undo screws (2).
2. Remove both screws (3) securing the top plate of the appliance.
3. Remove the top plate (4).
4. Remove the bracket (5) including the support pin with the washers in place.
5. Remove the support pin with washers from the bracket (5) and screw it back into
another hole in the bracket (5).
6. Remove the door (6) of the appliance.
7. Remove the locking plug (7) from the door and push it into the hole on the
opposite side.
8. Remove the bottom bracket (8) including the support pin with the washers in
place. Unscrew the support pin counter-clockwise. Rotate the bracket (8) by
180º and screw in the support pin again. Fix the bracket on the opposite side.
9. Set the cooler door on the support stud, moving it from the support (8). Screw
the bracket (5) together with the support pin with the washers in place.
10. Apply the top plate (4).
11. Tighten screws (2) and (3) firmly.
12. Place the supports (1) in the guides at the top of the rear panel.
13. Remove screw caps (a) and locking plugs (b). Undo screws of the door handles.
Move door handles to the opposite side. Screw them back on. Push the closing
plugs into the holes remaining in the door, cover screws with plugs.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher Compact - 700274 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher Compact - 700274 in the language / languages: English as an attachment in your email.

The manual is 0.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher Compact - 700274

Bartscher Compact - 700274 User Manual - German - 28 pages

Bartscher Compact - 700274 User Manual - Dutch - 28 pages

Bartscher Compact - 700274 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info