•The electric socket should be easily accessible so it is possible to quickly disconnect the power cord when necessary. The electric socket should be easily accessible so it is possible to quickly disconnect the power cord when necessary. The electric socket should be easily accessible so it is possible to quickly disconnect the power cord when necessary.
•Do not position the appliance in high humidity locations. Air relative humidity in
the place of installation should not exceed 60%. Excessive humidity may cause
rust and negatively influence the refrigerating efficiency of the device.
•The appliance should be installed only in rooms, where ambient temperature
does not exceed 32°C.
•To install the appliance, perform the following steps:
–Remove the packaging of the appliance, except for the pallet.
–Lift the appliance with the lift truck and move it to the planned installation
location. Be careful not to damage the appliance. Control the stability in
order not to lose the balance of the appliance.
–Do not drag nor push the appliance, as it may fall down. This may also
cause the damage to external elements or feet.
–As soon as the appliance is in the planned installation location, remove
the pallet.
–Level the appliance by screwing in or out the height-adjustable feet.
–Remove the protective film from the appliance at the end.
Power supply connection
•Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•Prior to first use, the appliance should be installed and left standing upright for at
least 12 hours, before it is connected to power supply.
•After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 15 minutes.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bartscher 700L GN211 - 700505 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bartscher 700L GN211 - 700505 in the language / languages: English as an attachment in your email.
The manual is 0.64 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
