–tape firmly all loose elements in the internal chamber and tape the door;
–the appliance may only be transported in vertical position.
•The electric socket should be easily accessible so it is possible to quickly disconnect the power cord when necessary. The electric socket should be easily accessible so it is possible to quickly disconnect the power cord when necessary. The electric socket should be easily accessible so it is possible to quickly disconnect the power cord when necessary.
Power supply connection
•Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
•After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2Operation
User instructions
•Shelves may be positioned at various heights. Arrange them adequately to the
size of beverage containers, so that the inner space of the appliance is used
optimally.
•Place beverage containers on shelves so that distances between them allow for
sufficient air circulation inside the appliance. Insufficient distances hinder the
cooling effect.
•During operation, the time of door opening should be as short as possible, so
that loss of cool air is minimised.
•If possible, in the event of a sudden power failure, avoid opening doors in order
to avoid loss of cool air.
Preparation of the appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section 6 “Cleaning”.
2. Finally, dry the appliance and accessories thoroughly.
3. Place bearing rails bracket at a desired height and install shelves.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bartscher 124L - 700121 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bartscher 124L - 700121 in the language / languages: English as an attachment in your email.
The manual is 0.85 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
