727954
4
Zoom out
Zoom in
Previous page
1/4
Next page
Software
When you plug in a ClickShare Conferencing Button on a PC running Windows for the first time, you may need to start the
software manually by opening the ClickShare USB drive. Please check this how-to video: How to Use the ClickShare Button
Video (will be available soon)
Note: On Windows 7, depending on your settings, the operating system may try to find drivers for the connected peripherals
online, which can take a couple of minutes. You can skip this by clicking the icon in the notification area of your taskbar and
confirm with ‘Skip obtaining driver software from Windows Update’:
Now, check the settings in your operating system and software:
Test the functionality of your peripherals in Windows as explained here.
Configure your conferencing software as explained here.
Hardware failure
The connections and the software are now correctly configured. If your issue is unsolved, the problem is probably coming
from the hardware.
The problem can come from many areas (cable, power supply, connected peripheral, ClickShare Conference unit, display, etc.),
so it’s important you try to identify where the problem is coming from:
Disconnect unnecessary devices, especially KVM switches and HDMI splitters (keep only one USB connection from the
Logitech camera to the ClickShare Conference unit, and one HDMI cable from the Base Unit to the display)
Try to swap cables
Reboot devices
Factory reset configurable devices
Connect the Logitech camera directly to your PC via USB (bypassing the ClickShare Conference unit)
If the camera does not function as intended, this indicates a failure of the camera;
If the camera works fine when plugged in directly to your PC, then it is either a connection issue, a configuration issue, a
ClickShare hardware issue or a ClickShare software issue;
If you have done the above tests and have concluded a hardware failure, please contact your ClickShare certified reseller
to get a replacement unit
Note: KVM switches are not supported, they will erroneously be recognized by the ClickShare Conference unit as Acoustic
Echo-Cancellation devices.
Who to contact in case your problem is unsolved?
Please contact your ClickShare certified reseller.
barco.com/logitech
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barco ClickShare Logitech Room Solution - Small at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barco ClickShare Logitech Room Solution - Small in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info