727953
3
Zoom out
Zoom in
Previous page
1/4
Next page
Step 7 – Make your first ClickShare Conference Call
In this last step, youconnect the ClickShare Conferencing Button to your laptop
and make your first ClickShare Conference Call.
Check out how-to video for help: How to Use the ClickShare Button Video (will be
available soon)
Should you encounter a problem, please read on, we’ll help you solve your
problem!
Troubleshooting
Introduction
When you connect the ClickShare Conferencing Button to your PC and click to start the enhanced conference meeting, the
ClickShare unit makes the room display, camera and speakers wirelessly available from your PC. You can use any UC software
to start your video conference and share content with your colleagues during the meeting.
Connections
First, make sure everything is connected properly. The Logitech devices should be connected directly via USB, as shown below:
You can connect several devices to the Logitech Rally Display Hub, but there should be only one USB connection to the
ClickShare Conference unit, as shown on the picture in step 6.
It is important that no other USB devices are connected to the ClickShare Conference Base Unit, like KVM switches (which are
currently not supported) or other peripherals. For troubleshooting purpose, we advise to disconnect any other USB connection
(e.g. from a touch screen) until you have verified that ClickShare Conference is working properly. After that, you can reconnect
the other USB devices.
Note: you’ll find a list of supported touch screen panels here.
In case of issues, please try to swap cables to check if the problem comes from a faulty cable.
Ifyou have a ClickShare Conference CX-50 unit, make sure you are using the HDMI OUT port to connect your display. HDMI IN
port is to connect a source.
If the problem persists after checking the connections, please reboot the ClickShare Conference unit.
Make sure the ClickShare Conferencing Buttons are paired with the ClickShare Conference unit. To pair a Button, connect it to
the Base Unit until the message ‘paired and updated’ appears on the connected display.
Logitech Conferencecam
Display
USB
HDMI
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barco ClickShare Logitech Room Solution - Medium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barco ClickShare Logitech Room Solution - Medium in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info