790925
5
Zoom out
Zoom in
Previous page
1/60
Next page
www.barbecook.com 5
If your country is not in the table, use the coupling that
complies with your national standards.
4.3.1 C
oupling
A
You need a 19 mm spanner and a cross-slotted screwdriver.
1.
Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 19 mm spanner (B).
This barbecue has been adjusted to be operate with 4,5
to 15 kg butane/propane cylinders with an appropriate
low pressure regulator. We recommend connecting the
appliance to propane. Propane offers a high-quality
combustion and is less sensitive to frost. The height H of
the cylinder must be less than 70 cm, regardless of the
cylinder’s width or diameter D.
Buy your pressure regulator and gas cylinder together.
Not all regulators fit all cylinders.
Use only a gas hose and regulator that is homologated
for the country of use.
4.2
Safety instructions
Never connect the cylinder directly to the appliance. Always
mount a pressure regulator on the cylinder first.
Never modify pre-assembled or sealed parts of the cylinder,
the hose or the pressure regulator.
Keep the hose as short as possible (1,5 m maximum) to
prevent it from dragging on the ground.
Never distort or twist the hose. Do not pull or pierce
the hose.Keep the hose away from any parts of the
barbecue that get hot. Check that the flexible hose
stretches out normally, without twisting or pulling.
It should be replaced if it is damaged or cracked, when
required by national regulations or at the end of the part
lifecycle (f.ex France)
Never open the gas supply.
Always keep the cylinder in an upright position.
Check for leaks each time you make changes to the gas
connection. See “5 Checking for gas leaks”.
4.3
Connecting the hose to the appliance
France:
The equipment may be used with two types of flexible hose:
Flexible hose designed to be joined onto ringed tailpieces
on both the barbecue and regulator sides, held firm
with collars (in accordance with standard XP D 36-110).
recommended length 1.25 m.
Flexible hose (according to standard XP D 36-112) fitted
with a G 1/2 threaded nut for fixing to the barbecue
and a M 20x1.5 threaded nut for fixing to the regulator,
recommended length 1.25 m.
Other countries:
It should be used with flexible hose that is suitable for use with
butane and propane gas. Hose length should not exceed 1.50 m.
To connect the gas hose to the appliance, you have to mount
a coupling on the gas tube of the appliance. The appliance
comes with two couplings, both intended for particular
countries:
2.
Slide the hose over the coupling (C) and tighten the
clamping ring with a cross-slotted screwdriver (D).
4.3.2 C
oupling
B
You need a 22 mm spanner and an adjustable spanner.
1.
Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 22 mm spanner (B).
2.
Screw the gas hose on the coupling (C) and tighten it with
two spanners. Hold the coupling with a 22 mm spanner,
while turning the hose with an adjustable spanner (D).
Country Coupling
223.7420.100 BE, CH, CZ, DK, ES,
FI, GB, IE, IT, PT, SI Coupling A
FR Coupling B
223.7420.000 FR
/
Country Cylinder, hose and
regulator
DK, GR, NO, SE, EE,
LT, LV, CZ, PL, MT,
HU, SI, SK, NL
Propane, 30 mbar /
Butane, 30 mbar
ES, GB,, IE, PT, BE,
FR, LU, IT, CY
Propane, 37 mbar /
Butane, 28-30 mbar
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook VICTOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook VICTOR in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info