790916
14
Zoom out
Zoom in
Previous page
1/400
Next page
14 www.barbecook.com
MAN_GAS_QUISSON_BBC_140730_A.book Page 14 Tuesday, February 2, 2016 4:55 PM
10.8 Avoiding flare-ups
During grilling, some flare-ups are normal. Too many flare-ups,
however, increase the temperature in the appliance and can
ignite accumulated fat. To avoid flare-ups:
Make sure the bowl is clean when you start grilling. We
recommend putting a new Leaf® in the bowl before each
use. See "11.2 Cleaning the bowl”.
Regularly check if the fat drain hole is not blocked and if the
fat drip tray or cup is not full yet.
When grilling fatty meat, trim excess fat, close the lid and set
the burners to a medium or low position.
11 MAINTAINING THE APPLIANCE
11.1 Cleaning the grill
We recommend cleaning the grill after each use, with the
Barbecook cleaner. Proceed as follows:
1Spray the foam on the grill and let it act for a while.
The foam discolours, as it soaks off the dirt and greases.
2Remove the foam with a soft sponge and water and rinse the
grill thoroughly.
3Dry the grill well and store it in a dry place. This prevents
formation of rust.
2You can also clean the grill with a soft detergent or with
sodium bicarbonate. Never use oven cleaners on the grill.
11.2 Cleaning the bowl
We recommend cleaning the bowl after each use. The easiest
way to do this is by putting a Leaf® in the bowl before you start
grilling. The Leaf® is a foil that fits the bowl perfectly and that
catches all residues and greases. When the appliance cooled
down, just remove the Leaf® and the bowl is clean.
2Register your appliance at www.barbecook.com to find
out which type of Leaf® you need.
11.3 Cleaning the burners and venturis
1
1
.3.1 WHY CLEAN THE BURNERS AND VENTURIS?
Spiders and insects can make webs and nests in the burners and
venturis. This may block the gas supply to the burners. As a
result:
You cannot light the burners. If you manage to light them
anyway, they will only produce smoky and yellow flames.
The gas can start burning outside the venturis, at the control
knobs. These fires are called flash-backs and can result in
serious injuries and material damage.
0Damages caused by blocked burners and venturis are
regarded as inadequate maintenance and are not
covered by the warranty.
1
1
.3.2 WHEN CLEAN THE BURNERS AND VENTURIS?
You have to clean the burners and venturis of your appliance:
Before the first use after a long period of non-use.
At least twice a year, of which once at the beginning of the
season.
1
1
.3.3 TO CLEAN THE BURNERS AND VENTURIS
1 Remove the burners from the appliance as shown on the
illustrations. If you notice that a burner is damaged, you have
to replace it.
A
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook STELLA 3221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook STELLA 3221 in the language / languages: All languages as an attachment in your email.

The manual is 49.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info