790886

Barbecook Spring 3112 Manual

8
Zoom out
Zoom in
Previous page
1/100
Next page
www.barbecook.com
8
Other countries:
It should be used with flexible hose that is suitable for use with
butane and propane gas. Hose length should not exceed 1.50 m.
To connect the gas hose to the appliance, you have to mount a
coupling on the gas tube of the appliance. The appliance comes
with two couplings, both intended for particular countries:
lf your country is not in the table, use the coupling that
complies with your national standards.
6.3.1 Coupling A
You need a 19 mm spanner and a cross-slotted screwdriver.
1. Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 19 mm spanner (B).
2. Slide the hose over the coupling (C) and tighten the
clamping ring with a cross-slotted screwdriver (D).
6.3.2 Coupling B
You need a 22 mm spanner and an adjustable spanner.
1. Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 22 mm spanner (B).
2. Screw the gas hose on the coupling (C) and tighten it with
two spanners. Hold the coupling with a 22 mm spanner,
while tuming the hose with an adjustable spanner (D).
6.4 Connecting the hose and cylinder to
the regulator
Depending on the type of pressure regulator you use, you need a
cross-slotted screwdriver and/ or an adjustable spanner.
1. Connect the hose to the pressure regulator. Do one of the
following:
• If the hose has a clamping ring, slide the hose over the
regulator and tighten the clamping ring with a cross-
slotted screwdriver (A).
• If the hose has a nut, screw the hose on the regulator
and tighten the nut with an adjustable spanner (B).
2. Connect the pressure regulator to the gas cylinder. Do one
of the following:
• If the regulator has a nut, screw the regulator clockwise
on the cylinder and tighten the nut with an adjustable
spanner (C).
• If the regulator has a screw thread, screw the regulator
counter-clockwise on the cylinder (D).
Use only regulators complying with EN 16129.
Coupling
Coupling A
Coupling B
Country
FR
BE, CH, CZ, DK, ES,
FI, GB, IE, IT, PT, SI
CD
AB
CD
AB
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook Spring 3112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook Spring 3112 in the language / languages: All languages as an attachment in your email.

The manual is 15.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info