458468
6
Zoom out
Zoom in
Previous page
1/22
Next page
CONGRATULATIONS ON THE
PURCHASE OF A BARBECOOK
®
!IMPORTANT:
Your barbecook
®
QuickStart
®
has an
extremely simple lighting system. Starter
fluid or firelighters should not be used.
Always follow the instructions for use. Please
check before every use if the clips are closed.
The barbecue can not be used when the clips
are open.
ASSEMBLY
1) Attach the wheels (n° 7) to the left tubing
(n° 3) and fix them with the clasps
(n° 8). Make sure the clasps are tightened
sufficiently.
2) Put the cross bar (n° 9) on both left and
right tubings and fix them with the screws
(n° 6).
3) Put the front wooden board (n° 11) in the
holders on both left and right tubing.
4) Fix the herd (n° 2) with screws (n° 4 & 5).
5) Attach the two lightening tubes (n°13) to
the herd (n°2) with the three screws and
nuts ( n°15).
6) Attach the ashtray (n°14) with the clips to
the lightening tube (n°13).
7) Put the two stainless steel charcoal grills
in the herd (n°1).
8) Put the cooking grid (n° 12) in the desired
position.
INSTRUCTIONS FOR USE
A) Lighting:
Remove the ground grid (1). Take three
double sheets of newspaper and scrumple
them up separately in the form of a torch.
Insert these sheets of newspaper in the
inner tube (13). Put the ground grid back
in place and spread dry charcoal on top of
the ground grid (do not use too much
charcoal when lighting the barbecue).
Open the ventilation hole and light the
newspaper throught the hole with a long
match or lighter. The burning paper will
light the charcoal. The smoke you see is
produced by the humidity of the charcoal
and the newspaper. After at least
15 minutes, your barbecook
®
is ready for
use. (At that moment, the glowing
charcoal is covered with a fine layer of
grey ashes.)
We advise to wait to install the cooking
grill on the barbecue until it is ready for
use.
B) Regulating the fire:
The fire intensity can be regulated in a
simple way by opening or closing the
ventilation hole.
C) Maintenance:
After having used the barbecue, remove
the ground grid and brush the ashes
toward the centre of the bowl. Afterwards,
release the barbecook
®
from the
QuickStop
®
and pour out the water / ash
mixture on an appropriate spot.
FIRST TIME USE
When using the barbecook
®
for the first time,
we strongly recommend to have it burn for
30 minutes without cooking meals. This
initial period is necessary.
USEFUL HINTS AND
PRECAUTIONARY MEASURES
1) The barbecook
®
can be used only out of
doors.
2) Always install the barbecue on a solid
base, away from inflammable and
meltable objects.
3) It is recommended to empty out the
QuickStop
®
each time the barbecue has
been used.
4) The bowl of the barbecook
®
has a capacity
of approximately 8L. (Optima) – 10L.
(Major & Arena). Do not use too much
charcoal in the bowl (max. 50%).
5
partyBinnen20pag.qxd 15/03/2005 8:47 Pagina 5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook Party Quickstart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook Party Quickstart in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info