503187
9
Zoom out
Zoom in
Previous page
1/48
Next page
www.barbecook.com 9
FR
IMPORTANT !
Assemblez le connecteur fourni !
A = Connecteur standard de 50 mbar
DE - CH - AU
1. Montez le connecteur fourni sur l’appa-
reil. Serrez tout d’abord à la main.
2. TRÈS IMPORTANT
Serrez ensuite le connecteur à fond à
l’aide de deux clés. Utilisez une clé AF
de 22 mm pour serrer le connecteur tout
en maintenant le tuyau de distribution de
gaz en place à l’aide d’une clé AF de 16
mm.
3. Enroulez le flexible de gaz (1) sur le nou-
veau connecteur (2) de l’appareil. Serrez
tout d’abord à la main.
4. TRÈS IMPORTANT
Serrez ensuite le connecteur à fond à
l’aide de deux clés. Utilisez une clé AF
de 17 mm pour serrer le flexible de gaz
tout en maintenant le connecteur en
place à l’aide d’une clé AF de 22 mm.
Nous vous recommandons de connec-
ter l’appareil à du propane pour obtenir
les meilleurs résultats.
EN
IMPORTANT!
Assemble the connector supplied!
A = Standard connector 50 mbar
DE - CH - AU
1. Fit the supplied connector to the appli-
ance. Tighten first by hand.
2. VERY IMPORTANT
Then tighten the connector firmly using
two spanners. Use a 22mm AF spanner
to tighten the connector while holding the
gas distribution pipe in place with a 16
mm AF spanner.
3. Wind the gas hose (1) onto the newly
fitted connector (2) of the apparatus.
Tighten by hand first.
4. VERY IMPORTANT
Then tighten the connector firmly using
two spanners. Use a 17mm AF spanner
to tighten the gas hose while holding
the connector in place with a 22 mm AF
spanner.
We recommend connecting the appli-
ance to Propane for the best results.
DE
WICHTIG!
Den mitgelieferten Anschuss montieren!
A = Standardanschluss 50 mbar
DE - CH - AU
1. Den mitgelieferten Anschluss am Gerät
anbringen. Zuerst handfest anziehen.
2. SEHR WICHTIG
Anschließend den Anschluss mit zwei
Schraubenschlüssel fest anziehen. Einen
22 mm AF-Schlüssel zum Festziehen
des Anschlusses verwenden. Dabei das
Gasverteilerrohr mit einem 16 mm AF-
Schlüssel gegenhalten.
3. Den Gasschlauch (1) auf den neuen An-
schluss (2) am Gerät montieren. Zuerst
handfest anziehen.
4. SEHR WICHTIG
Anschließend den Anschluss mit zwei
Schraubenschlüsseln fest anziehen.
Einen 17 mm AF-Schlüssel zum Fest-
ziehen des Gasschlauchs verwenden.
Dabei den Anschluss mit einem 22 mm
AF-Schlüssel gegenhalten.
Für ein optimales Ergebnis empfehlen
wir den Betrieb des Geräts mit Propan-
gas.
IT
IMPORTANTE!
Utilizzare il connettore fornito in dotazione!
A = Connettore standard da 50 mbar
DE - CH - AU
1. Installare il connettore fornito in dotazio-
ne con l’apparecchiatura. Inizialmente,
effettuare il serraggio manualmente.
2. MOLTO IMPORTANTE
Successivamente, completare il serrag-
gio del connettore mediante due chiavi.
Utilizzare una chiave fissa da 22mm per
serrare il connettore, mentre si tiene
fermo il tubo di alimentazione con una
chiave fissa da 16mm.
3. Inserire il tubo del gas (1) sul nuovo con-
nettore (2) dell’apparecchiatura. Inizialmen-
te, effettuare il serraggio manualmente.
4. MOLTO IMPORTANTE
Successivamente, completare il serrag-
gio del connettore mediante due chiavi.
Utilizzare una chiave fissa da 17mm per
serrare il tubo del gas, mentre si tiene
fermo il connettore con una chiave fissa
da 22 mm.
Per ottenere risultati ottimali, si racco-
manda di connettere l’apparecchiatura a
una bombola di propano.
PL
WAŻNE!
Zamontować dostarczoną złączkę!
A = Standardowa złączka 50 mbar
DE - CH - AU
1. Zamontować dostarczoną złączkę w
urządzeniu. Najpierw dokręcić ręcznie.
2. BARDZO WAŻNE
Następnie dokręcić mocno złączkę
dwoma kluczami. Kluczem 22 mm AF
dokręcać złączkę przytrzymując jedno-
cześnie przewód rozprowadzający gaz
za pomocą klucza 16 mm AF.
3. Nawinąć przewód gazowy (1) na nowo
zainstalowaną złączkę (2) urządzenia.
Najpierw dokręcić ręcznie.
4. BARDZO WAŻNE
Następnie dokręcić mocno złączkę
dwoma kluczami. Kluczem 17 mm AF
dokręcać przewód gazowy, jednocześnie
przytrzymując złączkę za pomocą klucza
22 mm AF.
Zalecamy podłączenie urządzenia do
źródła propanu.
NL
Markering van de inspuiters
Inspuiter hoofdbranders: 0,84
Inspuiter zijbrander: 0,64
FR
Marquage des injecteurs
Injecteur des brûleurs principaux: 0,84
Injecteur du brûleur latéral: 0,64
EN
Marking of the injectors
Injector main burners: 0,84
Injector side burner: 0,64
DE
Markierung der Einspritzdüsen
Einspritzdüse Hauptbrenner: 0,84
Einspritzdüse Seitenbrenner: 0,64
IT
Indicazioni relative agli iniettori
Iniettore bruciatori principali: 0,84
Iniettore bruciatore laterale: 0,64
PL
Oznaczenia wtryskiwaczy
Wtryskiwacz palników głównych: 0,84
Wtryskiwacz palnika bocznego : 0,64
Man_BANABA_DE_BBC120808_A.indd 9 10/08/12 15:50
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook BANABA GERMANY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook BANABA GERMANY in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 11,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info