812937
23
Zoom out
Zoom in
Previous page
1/52
Next page
6.1.3 Requirements on the chimney
Make sure the flue system obeys the national and local applicable regulations.
If the appliance is installed on an existing (masonry) chimney, make sure the chimney
is in good order and applicable for the appliance. Ask your dealer or chimney sweeper
for advice.
Make sure to use an appropriate chimney adapter, to connect the flue pipe to an
existing chimney, that prevents air leakage from the fireplace surround to the existing
chimney.
Make sure the weight of the chimney is not supported by the appliance.
Do not connect more than one appliance to the same chimney.
The flue system must have a temperature class designation of at least T400.
The inner diameter of the chimney must be at least 150 mm over the total length.
Use a steel chimney pipe with a wall thickness of at least 2 mm between the appliance
and the existing chimney.
Do not use more than 2 bends of 45°.
Do not use horizontal flue pipes.
The chimney outlet must be at least 5 meter above the top of the appliance.
The chimney outlet must be at least 40 cm above the top of a sloped roof.
The chimney outlet must be at least 1 meter above a flat roof.
The chimney outlet must be free from any objects (buildings, trees, etc.) within a
horizontal range of at least 5 meter.
If applicable, make sure an existing chimney valve has a free opening of minimum 12
% of the total area of the chimney, when closed.
Make sure your fire insurance policy covers any damage caused by a chimney fire.
6.2 Installation in an existing open fireplace
6.2.1 Preparation
1. Remove the existing fire basket and any other parts in the open fireplace.
2. Make sure the floor of the open fireplace is flat and not damaged.
3. Make sure the inner walls of the open fireplace are not damaged.
4. Put a layer of ceramic wool against the inner walls of the fireplace opening. Refer to
chapter
5.1
for specifications.
5. Put an appropriate chimney adapter on the existing chimney.
Installation
Unilux-7 80 23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Unilux 7-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Unilux 7-80 in the language / languages: English as an attachment in your email.

The manual is 1.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Unilux 7-80

Barbas Unilux 7-80 User Manual - English - 28 pages

Barbas Unilux 7-80 Installation Guide - German - 52 pages

Barbas Unilux 7-80 User Manual - German - 28 pages

Barbas Unilux 7-80 Installation Guide - Dutch - 52 pages

Barbas Unilux 7-80 User Manual - Dutch - 28 pages

Barbas Unilux 7-80 Installation Guide - French - 52 pages

Barbas Unilux 7-80 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info