812944
33
Zoom out
Zoom in
Previous page
1/48
Next page
2. Connect the other end of this aluminum pipe with the operating unit on connection
marked "P1". Use a compression fitting for the connection
3. Connect the other aluminum pressure line with a compression fitting on the upper
connection point (P2) on the venturi pipe.
4. Connect the other end of this aluminum pipe with the operating unit on connection
marked "P2". Use a compression fitting for the connection
Important: Make sure the pressure lines connections do not leak.
Connect the flue fan control module
1. Connect the multi-cable connector with contact "Receiver / Gas valve" ( C-1) on the
flue fan control module.
2. Connect the 2 plugs on the other end of the multi-cable to the multi cable connector
on the receiver ( R-1) and gas regulator block (G-1).
Note: The 2 plugs are different. Make sure the plugs connect easy on the
connectors. Connecting with force damages the connectors.
3. Connect the relay cable with the relay contact C-4 on the flue fan control module.
4. Connect the other end of the relay cable with relay contact R-4 on the receiver.
5. Get the cable with red and blue connectors and connect the end, marked blue, with
connector "TC-out" ( C-3) on the flue fan control module.
6. Connect the other end, marked red, with the connector "TC" ( R-2) on the receiver
7. Loosen the small nut on the thermocouple interrupter connector. Make sure not to
unscrew it completely!
8. Get the cable with the green and red connectors and put the red connector on
position G-3 on the gas regulator block.
9. Connect the other end of this cable, marked green, with connector "TC in" ( C-2) on
the flue fan control module.
10. Get the cable with the yellow and black connectors and connect the end, marked
yellow, with connector "SW" ( R-3) on the receiver.
11. Put the other end of this cable with the black connector on position G-2 on the gas
regulator block.
12. Make sure the plastic plug with the 2 connectors (G-2 and G-3) is in the correct
position in the thermocouple interrupter.
13. Fasten the small nut on the thermocouple interrupter
14. Connect the 12 VDC power adapter on connector C-8 on the flue fan control module
and put the 230 V plug in a socket near the operating unit.
Important:
Make sure to test the appliance together with the Opti-Vent system before
the fireplace is built. Make sure the fan starts and the pilot burner and main
burners ignite. If not, make sure all connections on the Opti-Vent system are
according the instructions in this manual.
Installation
Opti-Vent 33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Opti-Vent-systeem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Opti-Vent-systeem in the language / languages: English as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Opti-Vent-systeem

Barbas Opti-Vent-systeem User Manual - German - 52 pages

Barbas Opti-Vent-systeem User Manual - Dutch - 52 pages

Barbas Opti-Vent-systeem User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info