812713
16
Zoom out
Zoom in
Previous page
1/32
Next page
Before first use make sure that a newly-build chimney breast is dry. Walls that have not
dried sufficiently attract particles released from your appliance when suddenly opening
the door of the appliance during use.
After first few times of use of the appliance, a light deposit on the inside of the glass may
occur caused by curing of the paint. This can be removed with glass cleaner or ceramic
hob cleaner.
7
7.3 Firing the appliance
Note:
Skip this chapter and go to chapter
7.4
if the appliance has the Opti-Air
option installed.
7.3.1 First load and ignition
At the beginning the appliance and chimney is cold. It is important that both the appliance
and chimney reach a temperature that guarantees a good functioning of the appliance. A
too low temperature results in incomplete combustion and a poor chimney draught. To
avoid this do the following:
Warning:
Do not use the appliance when there is fog or haze or no wind.
1. Put the control lever in the far right position.
2. When, present, open the valve in the external combustion air supply line.
3. When present, open the chimney valve completely.
4. Open the door of the appliance.
5. Put 8 wood logs crosswise on the
floor of the combustion chamber.
6. Put a layer of small wood logs and 2
firestarter cubes on top of the wood
logs.
Operation
16
Evolux 100-45
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Evolux 100-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Evolux 100-45 in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Evolux 100-45

Barbas Evolux 100-45 Installation Guide - English - 48 pages

Barbas Evolux 100-45 Installation Guide - German - 52 pages

Barbas Evolux 100-45 User Manual - German - 36 pages

Barbas Evolux 100-45 Installation Guide - Dutch - 52 pages

Barbas Evolux 100-45 User Manual - Dutch - 32 pages

Barbas Evolux 100-45 Installation Guide - French - 52 pages

Barbas Evolux 100-45 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info