812708

Barbas Cuatro-7 60-60 Opti-Air Manual

46
Zoom out
Zoom in
Previous page
1/88
Next page
Note:
• Make sure the thickness of any plastering is taken into account when the
brickwork is being build.
• Do not use masking tape on the appliance. Masking tape damages the
paint on the appliance.
• If you use other material than bricks, install the material in accordance with
the instructions of the supplier of the material
• If you use other material than bricks, refer to the instructions of the supplier
of the used material for information on the need to use a mantle iron.
1. Identify the positions where the inlet openings and the outlet openings, for the AirBox
inserts or the grates, must be put. Refer to section
6.4
for requirements on the size
of the ventilation air and - if applicable - convection air openings. Refer to
5
for
requirements on minimum distances from ceiling and neighboring wall.
2. If the appliance has an Opti-Air system, make sure to put the room temperature
measurement cable and the battery holder in the correct position. Refer to section
8.11
and section
8.12
.
3. Build the brickwork around the appliance up to the upper frame around the glass.
a) Install the AirBox boxes or grates of the ventilation air inlets and - if applicable -
the convection air inlets.
b) Put the end of the NTC temperature measurement cable in the fitting box of one
of the ventilation air inlets. Make sure the ventilation air flows around the end of
the NTC temperature cable.
4. If applicable, install a mantle iron to support the brickwork above the appliance. Put
the mantle iron on both sides of the brickwork. Maintain a space of minimum 3 mm
between the appliance and the mantle iron.
5. If applicable, install the flexible aluminum pipes of the convection set. Refer to
section
8.8
.
6. Build the fireplace around the appliance.
7. Install the AirBox boxes or grates of the ventilation air outlets and - if applicable -
convection air outlets.
8. Install the frame around the appliance.
8.11 NTC room temperature sensor (Opti-Air system only)
1. Put the point of the NTC room
temperature sensor (this is the thin
black cable) in the ventilation air inlet
opening. Make sure to put the sensor
point in the path of the ventilation air
opening.
2. Make sure there is no tension on the
sensor cable.
Installation in a new fireplace
46 Cuatro-7 60-60
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Cuatro-7 60-60 Opti-Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Cuatro-7 60-60 Opti-Air in the language / languages: English as an attachment in your email.

The manual is 7.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Cuatro-7 60-60 Opti-Air

Barbas Cuatro-7 60-60 Opti-Air User Manual - English - 36 pages

Barbas Cuatro-7 60-60 Opti-Air Installation Guide - German - 92 pages

Barbas Cuatro-7 60-60 Opti-Air User Manual - German - 40 pages

Barbas Cuatro-7 60-60 Opti-Air Installation Guide - Dutch - 92 pages

Barbas Cuatro-7 60-60 Opti-Air User Manual - Dutch - 36 pages

Barbas Cuatro-7 60-60 Opti-Air Installation Guide - French - 92 pages

Barbas Cuatro-7 60-60 Opti-Air User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info