812708
35
Zoom out
Zoom in
Previous page
1/88
Next page
7 Installation in an existing open fireplace
7.1 Install the appliance - general procedure
1. Prepare the appliance. Refer to section
7.2
.
2. Install the appliance. Refer to section
7.3
.
3. Horizontally align the appliance. Refer to section
7.4
.
4. Do a final check. Refer to section
7.5
.
7.2 Preparation
1. Remove all items from the floor of the open fireplace.
2. Make sure the floor of the open fireplace is flat and not damaged.
3. Make sure the inner walls of the open fireplace are not damaged.
4. Put a layer of ceramic wool on the 2 sides, rear and top of the appliance. Refer to
section
5.1
for specifications.
5. Put an appropriate chimney adapter on the existing chimney. Make sure there is no
gap between the chimney adapter and the existing chimney.
6. Connect a stainless steel flexible pipe of sufficient length to the chimney adapter and
secure it with a hose clamp.
7. Put a layer of ceramic wool around the flexible flue pipe.
8. Remove the interior of the appliance. Refer to section
10.5
for instructions.
9. Remove the screws that hold the flue
pipe connector
10. Carefully remove the flue pipe connector. Make sure the gasket on the flue pipe
connector does not damage. Replace a damaged gasket.
7.3 Install the appliance
1. Connect the stainless steel flexible flue pipe to the chimney adapter. Use a hose
clamp to attach the flexible flue pipe to the chimney adapter.
2. Put the appliance in the correct position in the existing fireplace .
3. Make sure that the appliance is installed horizontally. Use a spirit level.
4. Pull the flexible flue pipe through the opening in the top of the appliance
5. Connect the flexible flue pipe on the flue pipe connector. Use a hose clamp. Make
sure the gasket on the flue pipe connector is not damaged.
6. Push the flue pipe connector with the flue pipe into the correct position in the
appliance.
Installation in an existing open fireplace
Cuatro-7 60-60 35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Cuatro-7 60-60 Opti-Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Cuatro-7 60-60 Opti-Air in the language / languages: English as an attachment in your email.

The manual is 7.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Cuatro-7 60-60 Opti-Air

Barbas Cuatro-7 60-60 Opti-Air User Manual - English - 36 pages

Barbas Cuatro-7 60-60 Opti-Air Installation Guide - German - 92 pages

Barbas Cuatro-7 60-60 Opti-Air User Manual - German - 40 pages

Barbas Cuatro-7 60-60 Opti-Air Installation Guide - Dutch - 92 pages

Barbas Cuatro-7 60-60 Opti-Air User Manual - Dutch - 36 pages

Barbas Cuatro-7 60-60 Opti-Air Installation Guide - French - 92 pages

Barbas Cuatro-7 60-60 Opti-Air User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info