541807

Baratza ESATTO Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
7
Operation and Programming
Start / Stop / Tare
Press this button to start the grinder
(after selecting a preset button (1,2 or
3). The grinder will stop automatically
when the pre-programmed weight has
been ground. If you’d like to stop the
grinder sooner, press the button again.
To TARE (zero) the unit, rst make
sure the grounds bin is totally empty
and properly inserted on the weigh
platform. Press and hold the TARE
button for 3 seconds, then release.
The display will then read 00.0.
Up / Down Arrow
Press either of these buttons to set
the weight value (in grams), displayed
in the LCD window
Programmable Dosage
Buttons 1 - 2 - 3
Each of these buttons can store a
programmable weight value. Simply
press the up or down arrow to select
the number of grams you desire, then
press and hold the button (1,2 or 3)
you want the displayed weight stored
to. As soon as the display blinks,
release the selected button (the new
value is now stored in Non-volatile
memory. Repeat for each of the three
buttons. The programmed weights will
remain stored in memory even if the
ESATTO
TM
is unplugged. If you adjust
the desired weight for any button
(1,2 or 3) but do NOT press and hold
the button, the new weight will be
displayed and temporarily stored in
volatile memory, however, if the Esatto
is unplugged, the new value will be
“forgotten”.
Calibration
On occasion it may be helpful to
recalibrate your Esatto. To do so, you
will need a 200 gram weight. (If you
don’t have a 200 gr weight, you can
“create” your own if you have another
accurate gram scale as follows: Place
the Esatto grounds bin on your gram
scale and ll it with water until it totals
200 grams (bin +water)). You are now
ready to do the calibration routine:
Make sure the grounds bin is re-
moved. Press and hold the START/
stop button for 3 seconds, then
release. This causes a reboot of the
Esatto. During the reboot, press and
hold buttons 1&2. The display will
come up with a value (approx 310-
350). Release buttons 1 &2. Press
button 1 again, “CAL” will briey show
in the display, then “200”, GENTLY
set the 200 gr weight on the platform.
Display will show “pas” and then show
“200”. Calibration is now complete.
Prior to use, you will need to TARE
with the empty grounds bin in place on
the weigh platform to “zero” the bin.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baratza ESATTO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baratza ESATTO in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baratza ESATTO

Baratza ESATTO User Manual - German - 12 pages

Baratza ESATTO User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info