637738
11
Zoom out
Zoom in
Previous page
1/80
Next page
Set up a wireless connection
An Ethernet cable must be used
temporarily to set up your
Playmaker with a wireless
connection.
Wireless setup via cable…
> Disable the wireless network on
your computer.
> Connect Playmaker directly to
the computer using an Ethernet
cable.
> Connect Playmaker to the mains
supply to switch on the product.
> The network indicator ashes
white for about 60 seconds and
then becomes solid white.*
2
> Enter the IP address
‘http://169.254.11.22’ in the
address bar of your internet
browser and press ‘Enter’.*
3
If
the web page is not displayed,
wait a while and refresh the
page.
> Select the menu ‘NETWORKS’
and follow on-screen
instructions.
> Disconnect Playmaker from your
computer.
> When the network indicator
becomes solid white, Playmaker
is connected to the network.
3
*If you use Internet Explorer,
version 7 or high er is required.
Make a wired connection
For the most reliable network
connection use Bang& Olufsen
recommended cables only.
Wired setup…
> Connect Playmaker directly to
the router using an Ethernet
cable.
> Connect Playmaker to the mains
supply to switch on the product.
> The network indicator ashes
white.*
2
Then it becomes solid
white and Playmaker is
connected to the network.
If a static IP setup is needed, see
the Playmaker section on www.
bang-olufsen.com/faq for the static
IP address.
Software update
If available, you can update your
Playmaker with new software.
Software update is performed
using the Playmaker setup page.
This requires an Ethernet cable and
Internet connection (See ‘Make a
wired connection’). During
software update, the Mute/
standby button ashes red.*
2
Factory reset
To return to default settings, you
can reset your product. Note that
you must set up Playmaker again
after a factory reset. Before
performing the factory reset, the
network indicator must be solid
white or orange.
> Insert a small pin, such as a
straightened paper clip in the
reset button hole for minimum
ve seconds.*
2
> The network indicator and the
Mute/standby button become
solid orange for ve seconds.
> The product restarts
automatically and is reset to
default settings.
11
NOTE! Make sure the cable
connection between the product
and the router does not exit the
building to avoid contact with high
voltage.
NOTE! You may not be able to use
your workplace computer for setup
of Playmaker due to security
restrictions, including rewall
settings and assignment of IP
addresses.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen Playmaker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen Playmaker in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info