START TIME and STOP TIME … Key in when you
want to start and stop recording.
DATE … The date you want your Timer executed.
(WEEKDAYS) … Appears when you highlight
DATE and press the green button on Beo4. All
the weekdays are shown – starting with M for
Monday.
PROTECTION … Select whether or not you want
to protect the recording from the space
management feature. Options are ON and OFF.
If you activate protection for a daily or weekly
Timer, all of the episodes of the programme are
protected. For further information about space
management, refer to page 19.
If FEATURE LEVEL is set to ADVANCED, as described
on page 36, the menu also contains the following
options:
QUALITY … Indicates the quality of the recording.
Options are STANDARD and HIGH. Note that a
recording occupies less space on the hard disc if
you select STANDARD.
EXTRA … Gives access to the following options:
GROUP … Indicates which Group of recordings
to place the recording in. Select one of the eight
existing Groups or DEFAULT.
NAME … Give the recording a name by using
the arrow buttons to select characters.
PARENTAL LOCK … Limit access to the
recording to those who know the correct four-
digit code. Enter the code using the number
buttons on Beo4. For further information about
the Parental Lock function, refer to the chapter
‘Preference settings’ on page 36.
KEEP EPISODES … Select a number of episodes
to keep when recording a programme on a daily
or weekly basis, such as a news programme.
This minimizes the use of hard disc space.
Options are 1–7 and ALL. If you activate
protection for a daily or weekly Timer, all of the
episodes of the programme are protected.
What’s on the PARENTAL LOCK CODE menu …
Once you have entered a code in the menu, you
can apply code protection to recordings in the
HARD DISC CONTENT menu, as well as to timed
recordings. It is then only possible to view these
recordings after entering the correct code.
Options are:
OLD CODE … Enter the current code.
NEW CODE … If you wish to change the code,
enter the new code here.
CONFIRM CODE … Enter the new code one more
time to confirm any change you have made to it.
