Manual Bang Olufsen BeoVision Horizon 48 (page 52 of 116) (English)

704887

Zoom out

Zoom in

1/116

Bass management

When switched on, the low frequency content in the audio signal may be re-routed to

different loudspeakers, depending on their capabilities. Bass management redirects low

frequencies to the most capable loudspeakers in your current setup. For example, if you

have two small loudspeakers and a subwoofer, the low frequency signals will be directed

to your subwoofer instead of to your smaller main speakers.

Crossover frequency: All output signals use the same crossover frequency to

ensure that coherent signals on multiple output channels have matched phase

responses when passed through the bass management and bass re-direction

processing. However, you can adjust it here or bypass it.

Enable filtering: Determine whether the bass management filtering should be on

or off for the individual output channels.

Panning: Adjust the panning of the bass management signal derived from each

output channel into the two bass management low-frequency channels. Adjust

bass according to your listening position.

Redirection levels: Adjust the level of the two bass management low-frequency

channels being added back to the output channels.

Redirection balance: Adjust the relative levels between the two bass

management low-frequency channels in each output channel.

LFE input to ceiling

Some record labels use the LFE (Low Frequency Effect) channel on their discs for height

information instead of low frequency effects. This means that the LFE input channel

should be directed to a 'full range' speaker placed above the listener. Setting the LFE

input to ceiling to Yes directs the audio signal on the LFE input to a loudspeaker with a

'ceiling' speaker role.

Subwoofer

Here, you can adjust the relative delays of the subwoofer and the main loudspeaker

channels and adjust the allpass frequency to better match the subwoofer to the main

speakers.

Time alignment: Allows you to adjust the relative delays of the subwoofer and

the main loudspeaker channels. When the value is positive, the subwoofer is

being delayed relative to the main loudspeaker channels. When the value is

negative, the subwoofer output precedes the main loudspeaker channels by the

displayed value.

All-pass frequency: There is a first-order allpass filter in the signal path of the

subwoofer output. This can be adjusted to better match the subwoofer to the

main speakers in cases where either the placement or the phase responses of

the loudspeakers result in poor matching of the upper- and lower-frequency

components through the crossover band.

Volume

Adjust the volume level of the television. The volume level you set here is the volume

level the television will start at each time you switch it on, no matter which volume level it

was at when you switched it off.

Here you also set the highest volume level allowed in normal usage. This can be used to

limit the maximum output of the television.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BeoVision Horizon 48 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BeoVision Horizon 48

Bang Olufsen BeoVision Horizon 48 User Manual - German - 127 pages

Bang Olufsen BeoVision Horizon 48 User Manual - Dutch - 121 pages

Bang Olufsen BeoVision Horizon 48 User Manual - French - 124 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bang Olufsen BeoVision Horizon 48 Manual

Product: