satellite product, you can use these settings to overrule the standard settings.
Some providers may give you transponder or LNB values which you can enter
here.
Satellite CA Modules
If you use a CA Module – a Conditional Access Module with a Smart Card – to watch
satellite channels, we recommend to do the satellite installation with the CA Module
inserted in the television.
Most CA Modules are used to decode channels.
CA Modules (CI+ 1.3 with Operator Profile), can install all the satellite channels by
themselves on your television. The CA Module asks you to install its satellites and
channels. These CA Modules not only install and descramble the channels but also handle
regular channel updates.
Channel packages
Satellites can offer channel packages that bundle free channels (free-to-air) and offer a
sorting that suits a country. Some satellites offer subscription packages – a collection of
channels you pay for.
If you choose a subscription package, the television may ask you to select a Quick or Full
installation.
Select Quick to install the channels of the package only or select Full to install the
package and all other available channels too. We recommend a Quick installation for
subscription packages. If you have additional satellites that are not part of your
subscription package, we recommend a Full installation. All installed channels are put in
the channels list All.
Unicable Setup
The Unicable system...
You can use a Single Cable system, MDU or Unicable system to connect the antenna dish
to the television. A Single Cable system uses one cable to connect the satellite dish to all
satellite tuners in its system. A Single Cable system is typically used in apartment
buildings. If you use a Unicable system, the television asks you to assign a user band
number and corresponding frequency during the installation. You can install one or two
satellites with Unicable on this television.
If you notice missing channels after a Unicable installation, another installation may have
been performed at the same time on the Unicable system. Perform the installation again
to install the missing channels.
User band number...
In a Unicable system, each connected satellite tuner must be numbered (for example, 0,
1, 2, or 3 etc.).
You can find the available user bands and their number on the Unicable switchbox. User
band is sometimes shortened as UB. There are Unicable switchboxes that offer 4 or 8
user bands. If you select Unicable in the settings, the television will ask you to assign the
unique user band number for each built-in satellite tuners. One satellite tuner cannot
have the same user band number as another satellite tuner in the Unicable system.
User band frequency...
Next to the unique user band number, the built-in satellite receiver needs the frequency
of the selected user band number. These frequencies are mostly shown next to the user
band number on a Unicable switchbox.
Automatic channel update
76
