704893

Bang Olufsen BeoVision Avant 85 - 2016 Manual

25
Zoom out
Zoom in
Previous page
1/120
Next page
find 'Placement'.
Depending on your setup, you can bring up a Stand adjustment menu for stand positions
or wall bracket positions.
The calibration process allows you to set the maximum angle the television will turn – left
and right.
Set up the television with a motorised floor stand
1. In the Stand adjustment menu, use and to turn the television by the pipe of
the floor stand and and to turn the television by the base of the floor
stand. The television must be parallel to the wall behind.
2. Press the centre button to proceed to the next step.
3. Use , or the number buttons to enter the distance between the stand and
the wall.
4. Highlight Save and press the centre button.
If your television has just been moved, you will also be asked to set up new stand
positions. Press the red button in the on-screen help and find 'Set a stand position' for
more information.
Set up the television with a motorised wall bracket
1. In the Stand adjustment menu, press or to turn the television to the
preferred position when fully closed.
2. Press the centre button to proceed to the next step.
3. Press or to turn the television to the preferred position when fully opened.
4. Press the centre button to save.
Set up the television with a table stand
When mounted on a table stand, you can tilt the television to the position you prefer.
1. In the Stand adjustment menu, press or to tilt the television to a
preferred position.
2. Press the centre button to save.
Transport of a stand
Moving of your television and floor stand to a different location, must be done by
qualified personnel. You must activate the transport mode. This ensures that the
calibration menu is shown when you switch on the television again, so you can determine
the distance to the wall again. All the saved stand positions are deleted when you
activate transport mode.
WARNING! Do not lift or otherwise move your television physically when it is mounted
on the floor stand. It could cause the TV screen to break. Contact your retailer.
1. In the Stand transport menu, select Yes and press the centre button to activate
transport mode. To deactivate transport mode, select No instead.
When the stand has been moved, you must calibrate the stand and set up stand
positions again.
25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BeoVision Avant 85 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BeoVision Avant 85 - 2016 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BeoVision Avant 85 - 2016

Bang Olufsen BeoVision Avant 85 - 2016 User Manual - German - 131 pages

Bang Olufsen BeoVision Avant 85 - 2016 User Manual - Dutch - 126 pages

Bang Olufsen BeoVision Avant 85 - 2016 User Manual - French - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info