704893

Bang Olufsen BeoVision Avant 85 - 2016 Manual

18
Zoom out
Zoom in
Previous page
1/120
Next page
For information about download of Peripheral Unit Controller (PUC) tables for set-top
boxes, press the red button in the on-screen help and find 'PUC tables'.
Smart Card for digital channels
If you want to watch coded channels, contact your service provider. The service provider
will register you as an authorised viewer, usually requiring payment. You will then be
provided with a Smart Card and a CA Module. Note that these will only be valid for one
service provider and therefore only work with certain channels.
The CA Module is a ‘card reader’ for your Smart Card which decodes the coded signals
sent out by the service provider. Only uncoded digital channels, also known as ‘free-to-
air’ channels, are available without Smart Cards and CA Modules.
Contact your Bang & Olufsen retailer for information about compatible CA Modules.
The Smart Cards must remain in the CA Modules, unless your service provider asks you
to remove it. This is important in case your service provider wishes to send new
information to your Smart Card.
Insert a Smart Card carefully into a CA Module. The CA Module has one protruding edge
on one side and two protruding edges on the other side. If the television does not receive
any signal, check that the Smart Card and CA Modules are inserted correctly.
Smart Cards and CA Modules may also give access to special menus which are not
described here. If this is the case, follow the instructions from your service provider. You
can access a Common interface menu when the TV tuner is the current source if you
press LIST and bring up Options.
When operating your television, you may need to use different pin codes other than a pin
code for your Smart Card. Pin codes are used for protective reasons, due to mandatory
requirement from providers and by external equipment. It may be easier for you if you
choose the same code for different systems when possible.
Connect speakers to the television
You can connect up to eight wired speakers and subwoofers to the television using
Power Link cables.
In addition, you can connect up to eight speakers wirelessly, including subwoofers. For
more information about setting up wireless speakers, press the red button in the on-
screen help and find 'Sound settings'.
Disconnect all systems from the mains before you connect additional products.
Depending on the type of speakers you connect to the television, different cables and
maybe also adaptors are needed. Cables and adaptors are available from your Bang &
Olufsen retailer.
The illustration shows an example of a speaker setup with two front speakers, two daisy-
chained rear speakers and a subwoofer.
Connect speakers
1. Connect a Power Link cable to the appropriate socket on the speakers you wish
to connect to the television.*
2. Run the cables to available sockets marked PL 1–4 on the television.
3. Connect a Power Link cable to the appropriate sockets on a subwoofer.
4. Run the cable to an available socket marked PL 1–4 on the television.
5. Reconnect the television and the connected speakers to the mains.
*Remember to set the switch for left and right position on the speakers depending on
whether your speaker is positioned on the left or right of your listening position.
18
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BeoVision Avant 85 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BeoVision Avant 85 - 2016 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BeoVision Avant 85 - 2016

Bang Olufsen BeoVision Avant 85 - 2016 User Manual - German - 131 pages

Bang Olufsen BeoVision Avant 85 - 2016 User Manual - Dutch - 126 pages

Bang Olufsen BeoVision Avant 85 - 2016 User Manual - French - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info