637614
82
Zoom out
Zoom in
Previous page
1/120
Next page
For Add Satellite to be available, the Settings menu must be set up to four satellites in
the start of the installation.
Remove a satellite
You may be able to remove one or more satellites from your current satellite installation.
You remove the satellite and its channels. Some satellite providers do not allow removing
a satellite.
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Satellite Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Search for Satellites.
6. Select Remove Satellite. The current satellites are shown.
7. Select a satellite to remove.
8. Press to go back one step or press to leave the menu.
For Remove Satellite to be available, the Settings menu must be set up to four satellites
in the start of the installation.
Manual installation
Manual installation is intended for advanced users.
You can use manual installation to test the signal strenght of an LNB. You can test the
signal through each tuner individually, tuner 1 (Sat 1) or tuner 2 (Sat 2). Alternatively, you
can use manual installation to quickly add new channels from a satellite transponder. You
can only add channels on tuner 1 (Sat 1).
To add channels, you need to know the frequency and polarization of the transponder.
The television will install all channels of that transponder. If the transponder was installed
before, all its channels - the former and the new ones - are moved to the end of the
channel list All. You cannot use manual installation if you need to change the number of
satellites. If this is needed, you have to do a complete installation with Install Satellites.
To test an LNB or save channels from a transponder…
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Satellite Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Manual Installation.
6. Select Tuner.
7. Select the tuner you want to test.
8. If you have more than one satellite installed, select the satellite/LNB for which
you want to test or add channels.
9. Select Polarization, and then select the polarization you need.
10. If you set the Symbol Rate Mode to Manual, you can enter the symbol rate in
Symbol Rate manually.
11. Select Search. The signal strenght is shown on-screen.
12. If you want to save the channels of a new transponder, select Store.
13. Press to go back one step or press to leave the menu.
Home transponder and LNB
On some markets, you can adjust the expert settings for homing transponder and each
LNB. Only use or change these settings when a normal installation fails. If you have a non-
standard satellite product, you can use these settings to overrule the standard settings.
Some providers may give you transponder or LNB values which you can enter here.
LNB Power
82
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BeoVision 14-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BeoVision 14-55 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BeoVision 14-55

Bang Olufsen BeoVision 14-55 Quick start guide - English, German - 32 pages

Bang Olufsen BeoVision 14-55 User Manual - German - 130 pages

Bang Olufsen BeoVision 14-55 User Manual - Dutch - 125 pages

Bang Olufsen BeoVision 14-55 Quick start guide - Dutch, Danish, French - 32 pages

Bang Olufsen BeoVision 14-55 User Manual - French - 127 pages

Bang Olufsen BeoVision 14-55 Quick start guide - Italian, Swedish, Spanish, Norwegian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info