Stand settings
Set up the stand
If your television is equipped with the optional motorised floor stand or wall bracket,
you can turn it using the remote control.
Furthermore, you can set the television to turn automatically to face your favourite
viewing position when you switch it on. It can turn to a different position when you
listen to, for example, a connected radio, and turn away to a standby position when
you switch it off. You can also set up other stand positions for other listening or
viewing positions.
If your television is equipped with the motorised stand, you can also turn and tilt it by
hand.
Settings
Stand
...
Set a stand position
Set a stand position – introduction
If your television is equipped with a motorised floor stand or wall bracket, choose one
position for start-up and one for standby. You can also preset stand positions of your
own choice, for example, when you sit in an armchair reading or when you sit at the
dining table. Bring up the Stand positions menu to store, name or delete a stand position.
You cannot rename or delete the Start-up and Standby stand positions.
Create a new stand position
In the Stand positions menu, set Start-up to the position you want your television to turn
to when it is switched on. Set Standby to the position you want your television to turn to
when it is switched off. You can also make a new stand position.
1. In the Stand positions menu, press the green button to make a new stand
position.
2. Use the arrow buttons to move the television to the desired position.
3. Press the centre button to save.
To delete an existing stand position, press the red button in the menu and follow on-
screen instructions. To rename a stand position, press the yellow button and follow on-
screen instructions. The pre-named stand positions can be changed but not renamed or
deleted.
Adjust the stand
If your setup includes a motorised floor stand or wall bracket, you will during first-time
setup be prompted to calibrate the outer positions of the motorised movement. For the
floor stand, this is done by entering the distance from the stand to the wall, follow on-
screen instructions. The motorised movement of the television will not work until the
calibration process has been completed.
Depending on your setup, you can bring up a Stand adjustment menu for stand positions
or wall bracket positions.
25
