704896
11
Zoom out
Zoom in
Previous page
1/62
Next page
11
During setup of a source via the SOURCE
LIST SETUP menu, you can select how a
PUC controlled product is connected.
You can choose between PLUG (cable)
and IR BLASTER (IR-transmitter). If you
select PLUG,
you must choose between
MODULATION
ON and MODULATION
OFF. For information about type of cable
and
modulation settings, contact your
Bang& Olufsen retailer.
IR-transmitters: To operate non-Bang&
Olufsen products with a Beo4/Beo6 remote
control, attach a Bang& Olufsen IR-
transmitter on your non-Bang& Olufsen
product and then connect it to one of the
sockets marked PUC on the connection
panel. Attach the transmitter near the IR-
receiver on the connected equipment to
ensure remote control operation. Before
attaching it, check that you can operate the
equipment menus on the television screen
using the Beo4/Beo6 remote control.
For an extra PUC cable, contact your Bang&
Olufsen retailer.
For information about download of
Peripheral Unit Controller (PUC) tables for
set-top boxes, see page48.
>> Connections
If you want to watch coded channels,
contact your service provider. The
service provider will register you as an
authorised viewer, usually requiring
payment. You will then be provided
with a Smart Card and a CA Module.
Note that these will only be valid for
one service provider and therefore only
work with certain channels.
The CA module is a ‘card reader’ for your
Smart Card which decodes the coded
signals sent out by the service provider.
Only uncoded digital channels, also
known as ‘free-to-air’ channels, are
available without Smart Cards and CA
Modules.
Contact your Bang & Olufsen retailer for
information about compatible CA Modules.
The Smart Cards must remain in the CA
Modules, unless your service provider asks
you to remove it. This is important in case
your service provider wishes to send new
information to your Smart Card.
Insert a Smart Card carefully into a CA
Module. The CA Module has one protruding
edge on one side and two protruding edges
on the other side. If the television does not
receive any signal, check that the Smart Card
and CA Modules are inserted correctly.
Smart Cards and CA Modules may also give
access to special menus which are not
described here. If this is the case, follow the
instructions from your service provider.
Digital channels
Control
STB
STB
PLUG
IR
COMMON INTERFACE
CHIPSIDE
CHIPSIDE
Continues…
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BeoVision 11-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BeoVision 11-55 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BeoVision 11-55

Bang Olufsen BeoVision 11-55 User Manual - German - 62 pages

Bang Olufsen BeoVision 11-55 User Manual - Dutch - 62 pages

Bang Olufsen BeoVision 11-55 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info