475180
31
Zoom out
Zoom in
Previous page
1/46
Next page
31
>> Set the television to switch itself on or off
DTV Play Timer
If the Play Timer you have programmed
on a connected Bang & Olufsen audio or
video product uses DTV as source, and
DVB-HD module is enabled in your
television, you must select settings for
MODE and GROUP. In MODE, you must
select whether radio or television should
be used as the source. In GROUP, you
must select which station or channels
groups to use, when the Play Timer is
executed.
To make settings for a DTV Play Timer …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight DTV PLAY
TIMER.
> Press the centre button to bring up the
DTV PLAY TIMER menu, and use the
navigation button up or down to move
between MODE and GROUP
> Use the navigation button left or right to
select the setting you want.
> Press the centre button to store the
setting.
> Press BACK to back up through previous
menus or press and hold BACK to exit all
menus.
Note! If the TV tuner is disabled, and the
DVB-HD module is activated by pressing TV
on the remote control, the name of the
menu is TV PLAY TIMER.
Also remember to set the PLAY TIMER menu
to ON, if the television or its speakers are to
be activated by the Play Timer.
Standby settings
The television can be set to switch itself
to standby after some time with no
operation. The factory setting is 4 hours.
This function only applies in video mode,
not in audio mode. You can also set your
television to save power.
To make standby settings …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight STANDBY
SETTINGS. Press the centre button to
bring up the STANDBY SETTINGS menu
and use the navigation button up or down
to move between AUTO STANDBY and
POWER SAVING.
> Use the navigation button left or right to
select the setting you want.
> Press the centre button to store the
setting.
> Press BACK to back up through previous
menus or press and hold BACK to exit all
menus.
When AUTO STANDBY is activated, a
message appears on your television screen if
the television has not been operated during
the time set in the menu. The television then
switches to standby if you do not operate it.
When no video signal has been detected for
15 minutes, the television is switched to
standby.
DTV PLAY TIMER menu.
STANDBY SETTINGS menu.
If you set the POWER SAVING to ON, Master
Link must no be connected and you cannot
activate the television or its sources from
your link room. Furthermore, when POWER
SAVING is set to ON you cannot activate
external play timers or make recordings on a
Bang& Olufsen hard disk recorder.
DTV PLAY TIMER
MODE TV
GROUP SPORT
STANDBY SETTINGS
AUTO STANDBY 4 HOURS
POWER SAVING OFF
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen Beovision 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen Beovision 10 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen Beovision 10

Bang Olufsen Beovision 10 User Manual - German - 46 pages

Bang Olufsen Beovision 10 User Manual - Dutch - 46 pages

Bang Olufsen Beovision 10 User Manual - French - 46 pages

Bang Olufsen Beovision 10 User Manual - Italian - 46 pages

Bang Olufsen Beovision 10 User Manual - Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info