19
Programming a sequence of tracks
You can program the CD player either
to play specific tracks on the CD you
have loaded, or to leave out certain
tracks.
To do so, you must start playing the
CD. If you don’t want playing to
continue while you program the track
sequence, press PAUSE.
You can then either select the tracks
you want in the sequence, using the
SELECT button; or you can reject the
tracks you want to leave out, using the
REJECT button. The display will guide
you through the programming.
Pressing PLAY (or CD) makes the CD
player start playing your programmed
sequence of tracks – in numerical
order.
The CD player memorizes the track
sequence until you unload the CD. But
you may also clear (cancel) the
sequence yourself by pressing REJECT
for two seconds (while the CD is
playing).
Note: By pressing the step buttons ▲ or ▼, you
can step through the tracks in the sequence as
you like.
Whenever you press the SELECT or the REJECT
button, the display prompts you to key in a track
number.
The display then writes SELECTED (included) or
REJECTED (excluded) indicating that the CD player
now memorizes the track number. Then press
SELECT or REJECT again to key in the next track
number you want (or don’t want) in your
sequence of tracks.
Start playing the CD
Press to pause the CD player
Then start programming your
sequence of tracks...
Press to include a track number
Key in the track number of your
choice, e.g. 10
Press to exclude a track number
Key in the track number you want to
leave out, e.g. 11
Repeat the including or excluding of
track numbers using one of the
above methods
Starts playing the programmed
sequence
Clears a programmed sequence of
tracks (hold down for 2 seconds)
CD
PAUSE
then
SELECT
then
REJECT
then
PLAY
CD
REJECT
or
or
↓
1
0
1
1
