USING THE TAPE RECORDER
16
Playing a tape
Starts playing the tape you have
loaded into the tape recorder
Press 1 to start playing from the
beginning of the tape
Press again for 2 seconds to »turn«
the tape to start playing the other
side
Press to pause the tape recorder
Press to resume playing
Press to raise the volume
Press to lower the volume
Press to switch the system to stand-
by
Selecting another source also turns
off the tape recorder
Pressing the TAPE button starts the
tape recorder. The display and all the
buttons for operating the tape recorder
light up, and the tape you have loaded
starts playing.
If you press 1 after starting the tape
recorder, the tape is rewound to start
playing from the first track.
You may of course ”turn” the tape any
time. To do so, just press the TAPE
button once more for 2 seconds, and the
other side of the tape starts playing.
The counter position is indicated in the
display, counting from 000 whenever
you start playing a new tape, and when
the tape is ”turned”.
You can pause the tape recorder at any
point by pressing STOP. To resume
playing, just press TAPE again.
When the tape has been played through
once (A and B side), the tape recorder
stops, waiting for another instruction to
play.
If you select another source, the tape
recorder stops automatically. To switch
off the entire system, press the stand-by
button, ●.
Note: If the tape recorder is left paused or
stopped for more than 30 minutes, the system
switches to stand-by.
Note: When the tape is ”turned” to play the B-
side, this is indicated in the display with a dash
before the counter indication: -000.
The other functions offered by the tape recorder
are:
●
Finding specific tracks or counter positions on
the tape (see page 17).
●
Noise reduction (see page 17).
●
Recording on tape (see pages 18 - 19).
●
Automatic tape reverse function (see page 20).
TAPE
TAPE
STOP
TAPE
∧
∨
●
