22653
8
Zoom out
Zoom in
Previous page
1/20
Next page
Connect cables
The loudspeaker can be connected to
Bang& Olufsen audio and video systems
as explained on page 9. It may also
be connected to non-Bang&Olufsen
systems as explained on page 10.
Use the illustrations and the graphics
imprinted on the socket panel when
locating the sockets and the switch.
For specic information about the
sockets on your audio or video system,
please refer to the Guide enclosed with
the system.
To get access to the panel, remove the cover
on the rear of the loudspeaker as explained
on page 7.
The ‘Syncr. connection’ is hidden beneath a small
cover. To get access, just pry the cover off.
Socket and switch panel
DIGITAL OUT
Phono socket/RCA socket used to forward the
digital signal from the rst loudspeaker to the next
(SPDIF unbalanced).
Digital connections carry both the right and left
sound channels.
DIGITAL IN
Phono socket/RCA socket used for connection to a
system with a digital output (SPDIF unbalanced).
Digital connections carry both the right and left
sound channels
.
~
Socket for connection to the mains supply.
RIGHT – LEFT
This switch sets the loudspeaker to play either the
right or the left sound channel. Set this switch to
RIGHT or LEFT respectively, when connecting the
loudspeaker using any of the sockets marked
POWER LINK, or the sockets marked DIGITAL.
When you connect the loudspeaker using the
socket marked LINE only, you may leave the switch
in either position.
Power Link cables may be run in two ways, as
illustrated here.
POWER LINK 1 – 2
Sockets for connection to Bang & Olufsen audio or
video systems.
Power Link connections carry both the right and
left sound channels.
LINE
Phono socket/RCA socket for connection to
non-Bang & Olufsen audio or video systems.
TheLINE signal must be a non-regulated line
signal(≤ 2 V RMS). If the LINE output level exceeds
2 V RMS, you must change the LINE input level on
each loudspeaker – as explained in Adapt BeoLab5
to your system (p. 11).
’Syncr. connection’
Socket for connection between two BeoLab 5
speakers in a setup. Used when connecting to
non-Bang & Olufsen systems only. The connection
ensures that both loudspeakers always play at the
same volume level.
The supplied plug and mains cord are specially
designed for the product. Do not change the plug
and if the mains cord is damaged, you must buy a
new one from your Bang & Olufsen retailer.
POWER LINK
RIGHT
LEFT
LINE
'Syncr.'
2
1
DIGITAL
OUT IN
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen Beolab5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen Beolab5 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen Beolab5

Bang Olufsen Beolab5 User Manual - German - 20 pages

Bang Olufsen Beolab5 User Manual - Dutch - 20 pages

Bang Olufsen Beolab5 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info