22653
5
Zoom out
Zoom in
Previous page
1/20
Next page
Use BeoLab 5 with a non-Bang&
Olufsen system
The loudspeakers must be connected as explained
on page 10, and the Option number set to 1 or 4,
as explained on page 11.
Operate your non-Bang & Olufsen system as you
normally would. However, you will have to use a
Beo4 remote control (optional accessory) to do the
following:
Switch the loudspeakers on and off;
Turn the volume level up or down;
Adjust the left–right sound balance (when you
switch on the loudspeakers, the balance is
always neutral);
Store and reset sound levels;
Use the PIN code system;
Change Option setting and LINE input level.
Although BASS, TREBLE, LOUDNSS are available in
the Beo4 display you cannot adjust these levels
usingBeo4. We recommend that you keep any
tonecontrol settings neutral.
For specic information about the Beo4 remote
control, please refer to its own guide
.
If BeoLab 5 is programmed to
Option 1
To switch BeoLab 5 on/off…
> Press RADIO to switch on.
> Press • to switch off.
To turn the volume level up/down...
> Press to turn the volume up.
> Press
to turn the volume down.
To reset the sound level...
> Press LIST, until RESET* is shown in the Beo4
display
> Press the centre button to reset sound level.
To shift the left–right sound balance...
> Press to shift the sound towards the left, and
press
to shift the sound towards the right.
To store a new start up sound level…
> Press until you reach your preferred start up
sound level.
> Press LIST until A.SETUP* is shown in the Beo4
display.
> Press the centre button to accept.
> Press LIST until S.STORE is shown in the Beo4
display.
> Press the centre button to store the setting.
If BeoLab 5 is programmed to
Option 4
To switch BeoLab 5 on/off…
> Press LIST until LINK* is shown in the Beo4
display, and then RADIO to switch on.
> Press • to switch off.
To turn the volume level up/down...
> Press to turn the volume up.
> Press
to turn the volume down.
To reset the sound level...
> Press LIST until RESET* is shown in the Beo4
display.
> Press the centre button to reset sound level.
To shift the left–right sound balance...
> Press to shift the sound towards the left
press
to shift the sound towards the right.
To store a new start up sound level…
> Press until you reach your preferred start up
sound level.
> Press LIST until A.SETUP* is shown in the Beo4
display.
> Press the centre button to accept.
> Press LIST until S.STORE is shown in the Beo4
display.
> Press the centre button to store the setting.
*Must be added to the Beo4 LIST-function. See the
Beo4 online guide at www.bang-olufsen.com/guides
.
Option 1
Option 4
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen Beolab5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen Beolab5 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen Beolab5

Bang Olufsen Beolab5 User Manual - German - 20 pages

Bang Olufsen Beolab5 User Manual - Dutch - 20 pages

Bang Olufsen Beolab5 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info