704939
4
Zoom out
Zoom in
Previous page
1/84
Next page
Press on both sides of the cable cover to release
it from the transmitter.
~ – Mains supply
Connection to the mains supply.
WIRELESS
Wireless status indicator.
SELECT
Press shortly to scan for un-configured
wireless speakers. Long press to start manual
configuration and then short press to switch
between speakers until the intended speaker
produces a sound during wireless setup.
STORE
Store speaker setting for a speaker and
move on to the next speaker. A long press
indicates the number of wirelessly connected
speakers in the PL status indicators.
USBB
For service only.
USBA ( )
For connection of a flash USB device for software
updates. For more information about software
updates, see www.bang-olufsen.com.
PL1-4
Inputs for connection of a video or audio system.
Each input has both a left and a right sound
channel, which is also indicated with a left/white
and right/red PL status indicator per input. If a PL
status indicator flashes, there is no connection to
the speaker.
B&OINPUT (YES–NO)
Input signal switch: YES is for connection of a
Bang& Olufsen system, and NO is for connection
of a non-Bang& Olufsen system.
TOSLINK
TM
Optical stereo input for connection of an audio
system. The volume of the signal must be adjusted
on the audio system.
INPUT (R–L)
Left and right line input for connection of an audio
system. The volume of the signal must be adjusted
on the audio system.
SUB–2.1 (OFF – ON)
Subwoofer switch: ON is for connection of two
speakers and one subwoofer using stereo input
(PL1, TOSLINK or INPUT (R-L)).
OFF is selected for all other setups, such as
surround sound setups.
Product status indicator:
Red (solid): The indicator is solid red shortly
when the transmitter is connected to the mains,
switches o, or when it restarts after it has been
reset.
Green (solid): The indicator is solid green
shortly when the transmitter switches on.
Green(ashing): A software update is in
progress during which the speakers cannot play.
Do not disconnect from the mains.
Orange(ashing): A hardware error has
occured. Disconnect the transmitter from the
mains and reconnect it. If the problem persists,
contact your Bang & Olufsen retailer.
Wireless status indicator:
White(solid): Speakers are connected to the
transmitter.
White(ashing): No speakers are connected
to the transmitter.
Green(ashing): Speakers are connecting to
the transmitter.
Product and wireless status indicators
simultaneously:
Orange(solid): The wireless signal strength is
low.
Orange(ashing): An error has occurred.
Disconnect the transmitter from the mains and
reconnect it. If the problem persists, contact
your Bang & Olufsen retailer.
Connection panel
English
4
The product status indicator is placed on the front
side of the transmitter.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen Beolab Transmitter 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen Beolab Transmitter 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info