637764
4
Zoom out
Zoom in
Previous page
1/12
Next page
Set up the loudspeaker
We recommend that you follow
this procedure:
Disconnect your system from the
mains supply.
Place the loudspeakers in your
setup.
Set the switches to the correct
setting. This is explained in ‘Adapt
the loudspeakers to your setup’
(page6).
Connect your speaker system.
Connect the entire system to the
mains again.
If you mount the loudspeaker on a
wall bracket, you cannot assemble
the base to the loudspeaker.
Cautions
Make sure that the loudspeakers
are placed and connected in
accordance with the instructions
in this Guide. To prevent injury,
use Bang & Olufsen approved
stands and wall brackets only!
The loudspeakers can only be
switched off completely by
disconnecting them from the
wall socket.
The loudspeakers are designed
for indoor use in dry, domestic
environments only, and for use
within a temperature range of
1040º C (50–105º F).
Remember that all speakers in a
setup must be connected to a
mains outlet, and that they are
designed to be connected to the
mains at all times, as this allows
them to switch on automatically.
Do not attempt to open the loud-
speaker. Leave such operations
to qualified service personnel!
Column and base
It is easiest to assemble the base and
the speaker column if the loud-
speaker is placed on the two foam
packaging blocks – as shown.
Remove the small plastic cylinder
from the threaded end of the loud-
speaker, and push the base onto
the threaded end. Fasten the base
to the column with the washer and
nut. Tighten the nut carefully.
4
NOTE! The type number of the
loud speaker appears on the label
which is placed on the inside of the
socket panel cover.
4


Need help? Post your question in this forum.

Forumrules
1

Forum

bang-olufsen-beolab-8002

Reset search

  • My speaker 8002 model not going on standby mode remains on red Submitted on 20-6-2021 at 20:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BEOLAB 8002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BEOLAB 8002 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BEOLAB 8002

Bang Olufsen BEOLAB 8002 User Manual - German - 12 pages

Bang Olufsen BEOLAB 8002 User Manual - Dutch - 12 pages

Bang Olufsen BEOLAB 8002 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info