637760
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
We recommend that you follow
this procedure when setting up
the BeoLab 2 subwoofer:
Read and abide by the cautions
on these two pages.
Disconnect your system from
the mains.
Connect your speaker system as
described in Connect your
speaker system.
Set the SETUP switch and the
POSITION switch to the correct
settings as described in Adapt
BeoLab 2 to your setup.
Place BeoLab 2 according to the
guidelines in Adapt BeoLab 2 to
your setup.
Finally, connect your system to
the mains.
To make a neat cable installation,
we suggest that you run the
cables through the enclosed cable
cover.
Before you start…
Cautions
The BeoLab 2 subwoofer is intended for
use with Bang & Olufsen active (Power
Link) loudspeaker systems only – it cannot
be used with other speakers.
Make sure that the BeoLab 2 is placed
and connected in accordance with the
instructions in this Guide.
Do not in any way block the free
movement of the BeoLab 2 speaker units,
and do not apply any force to them, as this
may result in permanent damage!
Place your BeoLab 2 on the floor on its
black rubber foot.
The BeoLab 2 is designed for indoor use
in dry, domestic environments only, and for
use within a temperature range of 10–40º C
(50–105º F).
Remember that all speakers in a setup
must be connected to a mains outlet, and
that they are designed to be connected to
the mains at all times, as this allows them
to switch on automatically.
Leave enough space for the speaker units to
move – both in front and to the sides of
BeoLab 2.
Use the top hole as a carrying ’handle’ when
you lift BeoLab 2.
Take care not to damage the speaker units,
and
never lift BeoLab 2 by gripping its sides!
A
B
Bottom view of BeoLab 2 showing the
location of the product identification label (A).
If you wish to adjust the black rubber foot,
place BeoLab 2 upside down and use the two
adjustment screws (B).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BEOLAB 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BEOLAB 2 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BEOLAB 2

Bang Olufsen BEOLAB 2 User Manual - German - 11 pages

Bang Olufsen BEOLAB 2 User Manual - Dutch - 11 pages

Bang Olufsen BEOLAB 2 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info