637761
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Connect your loudspeakers
You gain access to the BeoLab 1
socket panel through the base
plate.
So, connect the cables (and set the
two switches) while the BeoLab 1
is still lying on the packaging.
The setting of the L•R• LINE
switch is explained on this page,
and the setting of the Speaker
Position switch is explained on
pages 8–9.
Use the overview on the next page
and the graphics imprinted on the
socket panel for reference, when
locating the sockets and switches.
Note: To make a neat installation,
we suggest that you run the cables
through the cable cover as
explained on the next page.
to a Bang & Olufsen product
Connect the BeoLab 1 to your audio (or
video) system using the enclosed 8-pin
Power Link cable:
Plug one end of the cable into one of the
sockets marked POWER LINK on the BeoLab 1,
and the other end into any one of the two
sockets marked POWER LINK on the audio
or video system (please refer to the Guide
for the system in question).
The switch marked L•R•LINE must be set
to either L or R:
L for the left-hand speaker/sound channel;
set the switch to its utmost left position.
R for the right-hand speaker/sound channel;
set the switch to its middle position.
Looping the signals through from speaker
to speaker
To avoid cables running from both loud-
speakers to your system, you can loop the
signal through from speaker to speaker:
Connect one BeoLab 1 loudspeaker to your
system as previously described, e.g. the left-
hand speaker.
Make a connection from the first BeoLab 1 to
the other one, using the second Power Link
socket.
You may connect more than one pair of
BeoLab 1 speakers to your system (as many
as ten pairs, in fact). You just have to run a
Power Link cable from speaker to speaker.
Remember though, to set the L•R•LINE
switch to the proper position for the left-
and right-hand speakers, respectively.
LR
LR
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BEOLAB 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BEOLAB 1 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BEOLAB 1

Bang Olufsen BEOLAB 1 User Manual - German - 12 pages

Bang Olufsen BEOLAB 1 User Manual - Dutch - 12 pages

Bang Olufsen BEOLAB 1 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info