658689
38
Zoom out
Zoom in
Previous page
1/52
Next page
36 |
Software setup | Zeus Glass Helm Installation Manual
Ethernet setup
No special setup is required for establishing an ethernet network, it is all ‘plug and play’ . An
NEP-2 connected between an Zeus Glass Helm and another network module (e.g. BSM-1) will
automatically start working, and relay data between the two devices.
Diagnostics
The UDB (User Data Base) tab on the diagnostics page, provides information on Ethernet
activity, as shown below.
The ‘Reset Display List’ can be used to refresh the list of connected displays and their UDB
version.
Databases
The upper table gives an account of the various automatically synchronised databases that
ensure B&G display units are all using the same user settings and data. Each unit stores
the database locally, so that all information is available if the device is run in standalone.
Databases can become unsynchronised when one or more displays in a multi display
network are not powered up while other displays are being operated. Creation of waypoints,
routes, and altering global settings all a ect databases. When ‘Dirty is displayed, the unit
has identi ed that its database is older than that of another device on the network. The
text should clear within seconds of both devices being powered up, and the databases
synchronising. If it does not clear, it is recommended that all devices have the power cycled.
If any database wont synchronise, it may be necessary to use the Restore Defaults option
found under the System menu. Backup any user settings if required - see “Backing up and
importing user data on page 39. The Restore Defaults operation should be done one
device at a time, with all other devices powered o . Once a device is defaulted, it should be
turned o until all other devices have also been defaulted.
IP addresses
The lower table shows the IP address of the display being viewed (top of list), the Master
display, and any other displays in a multi display network. The function of the Master
is invisible to the end user - It manages database synchronisation, however this task
automatically shifts to another display if the current master is shut down. The IP address list
only refreshes after all devices on the network have been powered down - a single device
that is shutdown on the network will not be removed from the table shown on other devices.
When powering up a system that has been completely shutdown, a network connectivity
issue can be identi ed if a display does not show any other IP addresses than its own.
The ‘UDB version is dependant on the software version installed on the device. It will never
change on its own, unlike the Version’ of the Databases on the upper table. It is preferable to
have all UDB versions the same. This can usually be acheived by loading the latest software -
refer to “Zeus2 Glass Helm software upgrades on page 39.
Module network light
The network LED on modules such as NEP-2, BSM-1, and RI10, can be useful for determining if
the network is fundamentally operational. No light indicates no connection. A rapidly blinking
green LED means the network module is communicating with another device.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus2 Glass Helm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus2 Glass Helm in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus2 Glass Helm

BandG Zeus2 Glass Helm User Manual - English - 136 pages

BandG Zeus2 Glass Helm User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info