658689
34
Zoom out
Zoom in
Previous page
1/52
Next page
32 |
Software setup | Zeus Glass Helm Installation Manual
Navigation change limit
This parameter de nes the maximum course change that the autopilot is allowed to make
when the Zeus Glass Helm is following a route (NAV steering).
If the required course change to the next waypoint in a route is more than the set limit, you
are prompted and must acknowledge the course change before the autopilot will turn the
vessel.
Fuel setup
The fuel utility monitors a vessel’s fuel consumption. This information is totalled to indicate
trip and seasonal fuel usage, and is used to calculate fuel economy for display on instrument
pages and the data bar.
To use the utility, a Navico Fuel Flow sensor, or a NMEA 2000 engine adaptor cable/gateway
with Navico Fuel Data Storage device must be  tted to the vessel. Neither the Navico Fuel
Flow sensor, nor the Suzuki engine interface require the use of a seperate Fuel Storage device.
Refer to the engine manufacturer or dealer for information on whether or not your engine
provides a data output, and what adaptor is available to connect to NMEA 2000.
Once physical connection is made, ensure source selection is completed. Multiple engine
installations using Fuel Flow sensors, or Fuel Data Storage devices, will require setup of related
engine location in the device list. For general source selection information refer to “Source
selection on page 20.
note: Multiple engines utilising a single gateway will not work with the Navico Fuel Storage
device.
Vessel setup
This dialog must be used to select the number of
engines, the number of tanks and vessel’s total fuel
capacity across all tanks.
Fuel  ow con guration
Once the number of engines are set, it’s required to set which fuel  ow sensor is connected to
which engine. Under ‘Device list on the Network page, view the ‘Device Con guration page
for each sensor, and set ‘Location to match the engine the device is connected to.
‘Uncon gure’ is for defaulting the device clearing all user settings, and ‘Reset Fuel Flow’ will
restore only the ‘Fuel K-Value’ setting, if set in ‘Calibrate. Only Navico devices can be reset.
Calibrate
Calibration may be required to accurately match measured  ow with actual fuel  ow. Access
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus2 Glass Helm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus2 Glass Helm in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus2 Glass Helm

BandG Zeus2 Glass Helm User Manual - English - 136 pages

BandG Zeus2 Glass Helm User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info