658655
40
Zoom out
Zoom in
Previous page
1/66
Next page
40
|
Ethernet (NETWORK port) | Zeus Touch installation manual
Ethernet setup
No special setup is required for establishing an ethernet network, it is all ‘plug and play’ . An
NEP-2 connected between an Zeus Touch and another network module (e.g. BSM-1) will
automatically start working, and relay data between the two devices.
Diagnostics
The UDB (User Data Base) tab, on the diagnostics page, provides information on Ethernet
activity.
Databases
The upper table gives an account of the various automatically synchronised databases that
ensure B&G display units (Zeus Touch, Zeus, plus Simrad NSS, NSE, and NSO) are all using the
same user settings and data. Each unit stores the database locally, so that all information is
available if the device is run in standalone. Databases can become unsynchronised when one
or more displays in a multi display network are not powered up while other displays are being
operated. Creation of waypoints, routes, tracks, and altering global settings all a ect databas-
es. When the tick box ‘Dirty is ticked, the unit has identi ed that it’s database is older than that
of another device on the network. The tickbox should clear within seconds of both devices
being powered up, and the databases synchronising. If it does not clear, it is recommended
that all devices have the power cycled.
IP addresses
The lower table shows the IP address of the display being viewed (top of list), the Master
display (with a tick next to it), and any other displays in a multi display network. The function
of the Master is invisible to the end user - It manages database synchronisation, however this
task automatically shifts to another display if the current master is shut down. The IP address
list only refreshes after all devices on the network have been powered down - a single device
that is shutdown on the network will not be removed from the table shown on other devices.
When powering up a system that has been completely shutdown, a network connectivity
issue can be identi ed if a display does not show any other IP addresses than it’s own.
The ‘UDB version is dependant on the software version installed on the display. It will never
change on its own, unlike the Version of the Databases on the upper table. It is preferable to
have all USB versions the same. This can usually be acheived by loading the latest software on
to your display (see Applying Software Updates on page 51).
Module network light
The network LED on modules such as NEP-2, BSM-1, and RI10, can be useful for determining if
the network is fundamentally operational. No light indicates no connection. A rapidly blinking
green LED means the network module is communicating with another device.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus Touch in the language / languages: English as an attachment in your email.

The manual is 10,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus Touch

BandG Zeus Touch User Manual - English - 115 pages

BandG Zeus Touch User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info