658655
24
Zoom out
Zoom in
Previous page
1/66
Next page
24
|
External GPS | Zeus Touch installation manual
Echosounder setup
Select echosounder source
Choose the Echosounder source in the Echo Settings . MENU > MENU > ECHO.
This can be selected to be the echosounder built in to the display (Zeus Touch 7 and Zeus
Touch 8 only), or an external sounder module such as the BSM-1.
Deselecting the Network Echosounder option, limits source selection to internal sonar only.
Depth o set
This is a value that can be entered on the Echo Installation page to make depth readings
relate to any point from the water surface, to the deepest point of the vessel.
Below are some typical ways in which the o set is used:
A) For Depth below Keel: Set the distance from transducer to the keel.
Enter a negative value, e.g.
B) For Depth Below Transducer: no o set required.
C) For Depth Below Surface (waterline): Set the distance from transducer to the surface:
Enter a positive value., e.g.
AB C
Echosounder software version
For external sounder modules, the software version is displayed under Sonar installation. To
upgrade Sonar software See Applying Software Updates” on page 51
Water speed calibration (Echosounder transducer)
Water speed calibration is used to adjust the speed value from the paddle wheel to match the
actual boat speed through the water. Actual speed can be determined from GPS speed over
ground (SOG) or by timing the boat over a known distance. Water speed calibration should be
performed in calm conditions, with minimal wind and current movement.
Select Auto correct to match water speed to ground speed (SOG).
Manual calculation. Increase this value above 100% if the paddle wheel is under reading, and
decrease this value if it is overreading, e.g. if the average water speed reads 8.5 knots and SOG
records 10 knots the calibration value needs to be increased to 117%. To calculate the adjust-
ment, divide the SOG by the paddlewheel speed, and multiply the product by 100.
Calibration range: 50-100%. Default is 100%.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus Touch in the language / languages: English as an attachment in your email.

The manual is 10,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus Touch

BandG Zeus Touch User Manual - English - 115 pages

BandG Zeus Touch User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info