658655
18
Zoom out
Zoom in
Previous page
1/66
Next page
18
|
Connecting power | Zeus Touch installation manual
Connecting power
Power connection (basic)
The Zeus Touch display can be powered by either 12
V or 24 V DC. Displays are protected against reverse
polarity, under voltage and over voltage.
The supplied power cable has a four core cable used
for:
power into the system (Red and Black wires)
controlling power state of the display or power state of
other displays and devices (Yellow wire)
connecting to an external alarm (Blue wire)
Connect red to (+) DC using a 5 amp fuse for Zeus
Touch12, and a 3 amp fuse for Zeus Touch7 and Zeus
Touch8. Connect Black to (-) DC. The display can be
powered on and o using the power button.
Power Control (yellow wire)
Planning is required how you want to be able to turn on and o the Zeus Touch an connected
compatible devices.
The yellow (Power Control) wire on the Zeus Touch power cable can either be an input that
will turn on the display when power is applied, or an output that turns on other devices when
the display is powered on. It can be con gured at the installation stage to control the power
state of displays and compatible devices. When commissioning the system, displays can be
set to be a Power Control Slave or Power Control Master.
Power Control con guration options of the Zeus Touch are:-
use the Power button to turn on the display only: Yellow wire not connected
display to turn on when power is applied to the display: Common red and yellow wires
use the Power button to turn on the display and other displays and or compatible devices
such as Broadband Radar: Yellow wire connected to a Power Control Bus. (Set one or more
displays to be a Power Control Master)
12 - 24 V DC
Red
Black
Yellow
+
_
Blue
(FUSE)
12 - 24 V DC
Red (FUSE)
Black
Yellow
Blue
+
_
No Power Control
Display will turn on and o when the
power button on the front of the unit is
pressed.
Leave yellow Power Control wire discon-
nected. Tape or heat-shrink end to prevent
shorting.
Auto Power on
Display will turn on when power is applied.
Common the yellow wire with the red wire
after the fuse.
Note: The unit can not be powered down by
power button, but can be put in to standby
mode. (screen backlight o ).
4
12 - 24 V DC
Red
Black
Yellow
+
_
Blue
(FUSE)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus Touch in the language / languages: English as an attachment in your email.

The manual is 10,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus Touch

BandG Zeus Touch User Manual - English - 115 pages

BandG Zeus Touch User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info